EUVIMEDEUVIMED entdecken
Crossref

Development of core–shell electrospun fibers for enhanced mechanical and adhesion properties in dental composites

Reyhaneh Shekarian, Dariush Semnani, Saied Nouri Khorasani, Mohammad Atai

Polymer International · 2026-09 · 75 (9) · 832-839

DOI: 10.1002/pi.70112 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer International, online erschienen am 23.04.2026. Verfasst von Reyhaneh Shekarian und 3 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates core–shell electrospun fibers with a polyacrylonitrile (PAN) core and a poly(methyl methacrylate) (PMMA) shell incorporating tri(ethylene glycol) dimethacrylate/bisphenol A glycidyl methacrylate (TEGDMA/BisGMA) resin. The objective is to enhance interfacial adhesion between the fibers and dental resin, ultimately improving mechanical properties. The coaxial electrospinning technique was used to produce the fibers (PAN‐PTB), which were introduced into a resin matrix at various mass fractions. Extraction experiments indicated that the fibers contained 22.0% TEGDMA/BisGMA, which is close to the theoretical value of 26.3%. Tensile testing of the fiber mats revealed that the PMMA mat exhibited significantly inferior tensile properties when compared to the PAN mat, with a 72.0% reduction in tensile strength and a 74.4% decrease in work at break. In contrast, the PAN‐PTB mat demonstrated a remarkable enhancement in tensile strength, modulus, elongation at break, and work of rupture, with increases of 239.2%, 72.0%, 105.4%, and 707.3%, respectively, compared to the PAN mat. The optimal flexural properties were achieved with composites reinforced by 2.5 wt% PAN‐PTB fibers, which had about 0.6 wt% PAN, resulting in a 16.3% enhancement in flexural strength compared to neat resin. Despite lower PAN content than in composites with 2.5 wt% neat PAN fibers, the two types of composites did not show significant differences, owing to the PTB fiber shell, which enhanced interfacial adhesion. Microscopy analysis confirmed strong adhesion of PAN‐PTB fibers with the matrix, with no visible interfacial gaps. © 2026 Society of Chemical Industry.

Zitieren

APA

Shekarian, R., Semnani, D., Khorasani, S. N., & Atai, M. (2026). Development of core–shell electrospun fibers for enhanced mechanical and adhesion properties in dental composites. Polymer International, 75(9), 832-839. https://doi.org/10.1002/pi.70112

Vancouver

Shekarian R, Semnani D, Khorasani SN, Atai M. Development of core–shell electrospun fibers for enhanced mechanical and adhesion properties in dental composites. Polymer International. 2026;75(9):832-839. doi:10.1002/pi.70112

BibTeX
@article{Shekarian2026,
  author = {Shekarian, Reyhaneh and Semnani, Dariush and Khorasani, Saied Nouri and Atai, Mohammad},
  title = {Development of core–shell electrospun fibers for enhanced mechanical and adhesion properties in dental composites},
  journal = {Polymer International},
  year = {2026},
  volume = {75},
  number = {9},
  pages = {832--839},
  doi = {10.1002/pi.70112}
}
Kostenlos starten →