EUVIMEDEUVIMED entdecken
Crossref

Fabrication and characterization of PZT / PVDF composite films for force sensor applications

Suprapto, Yung Ting, Hariyanto Gunawan, Edwar Yazid, Aditya Sukma Nugraha, Budi Azhari, M Luthfi Ramadiansyah, M Fathul Hikmawan, Jubaidah

Polymer International · 2024-09 · 73 (9) · 727-747

DOI: 10.1002/pi.6643 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer International, online erschienen am 22.05.2024. Verfasst von Suprapto und 8 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 71 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explored the impact of hot press parameters on lead zirconate titanate (PZT)/poly(vinylidene fluoride) (PVDF) composite films designed for force‐sensing applications. The systematic fraction (PZT/PVDF), pressure, temperature, and time during hot pressing processes are subject to variation. The focus is on the resulting composite film thickness and its subsequent influence on the piezoelectric properties, which are essential for the performance of force sensors. The present study investigated the characteristics and performance of PZT/PVDF composite films with fraction ratios 2/5, 5/5, and 7/3 and hot pressure of 10, 40, and 60 MPa and temperature at 150 °C for 2 h. The characterization of these films was conducted using X‐ray diffraction, Fourier transform infrared spectroscopy, atomic force microscopy, and scanning electron microscopy. The piezoelectric properties ( d 33 and d 31 ) were measured using impact and extraction tests to evaluate the performance of films with applied forces. The results show that the highest piezoelectric coefficients ( d 33 and d 31 ) were determined to be 35.8 and 12.60 pC N −1 , with fraction ratios of 7/3 and 2/5. The study revealed a positive correlation between the PZT/PVDF ratio and sensitivity, indicating that an increase in the ratio leads to an increase in sensitivity. Conversely, a negative relationship was observed between the impact load and the sensor sensitivity, suggesting that an increase in the impact load results in a sensitivity decrease. The results of this work demonstrate the great potential of piezoelectric PZT/PVDF composite films in force sensors for small load applications. © 2024 Society of Chemical Industry.

Zitieren

APA

Suprapto, Ting, Y., Gunawan, H., Yazid, E., Nugraha, A. S., Azhari, B., Ramadiansyah, M. L., Hikmawan, M. F., & Jubaidah (2024). Fabrication and characterization of PZT / PVDF composite films for force sensor applications. Polymer International, 73(9), 727-747. https://doi.org/10.1002/pi.6643

Vancouver

Suprapto, Ting Y, Gunawan H, Yazid E, Nugraha AS, Azhari B, et al. Fabrication and characterization of PZT / PVDF composite films for force sensor applications. Polymer International. 2024;73(9):727-747. doi:10.1002/pi.6643

BibTeX
@article{Suprapto2024,
  author = {Suprapto and Ting, Yung and Gunawan, Hariyanto and Yazid, Edwar and Nugraha, Aditya Sukma and Azhari, Budi and Ramadiansyah, M Luthfi and Hikmawan, M Fathul and Jubaidah},
  title = {Fabrication and characterization of PZT / PVDF composite films for force sensor applications},
  journal = {Polymer International},
  year = {2024},
  volume = {73},
  number = {9},
  pages = {727--747},
  doi = {10.1002/pi.6643}
}
Kostenlos starten →