EUVIMEDEUVIMED entdecken
Crossref

Egg‐Inspired All‐Acrylate Three‐Layer Core–Shell Impact Modifier for Rigid–Elastic Toughening of Transparent Poly(Methyl Methacrylate)

Yuao Li, Fan Yang, Xiang Liu, Guanjun Chang, Runxiong Lin, Tao Zhuang

Polymer Engineering & Science · 05.11.2026

DOI: 10.1002/pen.71013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 05.11.2026. Verfasst von Yuao Li und 5 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An egg‐inspired all‐acrylate three‐layer core–shell impact modifier ( AIM ), consisting of a poly(trimethylolpropane triacrylate) ( PTMPTA )‐rich core, a crosslinked poly(butyl acrylate) ( PBA )‐rich interlayer, and a poly(methyl methacrylate) ( PMMA )‐rich outer layer, was prepared by sequential seed emulsion polymerization for transparent toughening of PMMA . The selected AIM had a hydrodynamic diameter of ~245 nm. At 20 wt% loading, PMMA / AIM exhibited notched Izod and Charpy impact strengths of 10.30 ± 0.31 and 9.10 ± 0.23 kJ /m 2 , respectively, with the Izod value reaching ~5.7 times that of the PMMA control. Total luminous transmittances of 89.3% and 87.6% and haze values of 4.5% and 5.2% were retained at thicknesses of 1 and 2 mm, respectively. Independent AIM batches showed low between‐batch variation (coefficients of variation, 0.56%–4.44%). Fracture‐surface observations were consistent with enhanced plastic deformation and energy dissipation without directly resolving the complete microscopic fracture sequence. After 72 h of accelerated UV aging, PMMA / AIM exhibited substantially lower yellowness than the styrene‐containing reference. These results demonstrate a reproducible all‐acrylate approach for improving the toughness–transparency balance of PMMA while limiting post‐aging yellowness.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, Y., Yang, F., Liu, X., Chang, G., Lin, R., & Zhuang, T. (2026). Egg‐Inspired All‐Acrylate Three‐Layer Core–Shell Impact Modifier for Rigid–Elastic Toughening of Transparent Poly(Methyl Methacrylate). Polymer Engineering & Science. https://doi.org/10.1002/pen.71013

Vancouver

Li Y, Yang F, Liu X, Chang G, Lin R, Zhuang T. Egg‐Inspired All‐Acrylate Three‐Layer Core–Shell Impact Modifier for Rigid–Elastic Toughening of Transparent Poly(Methyl Methacrylate). Polymer Engineering & Science. 2026. doi:10.1002/pen.71013

BibTeX
@article{Li2026,
  author = {Li, Yuao and Yang, Fan and Liu, Xiang and Chang, Guanjun and Lin, Runxiong and Zhuang, Tao},
  title = {Egg‐Inspired All‐Acrylate Three‐Layer Core–Shell Impact Modifier for Rigid–Elastic Toughening of Transparent Poly(Methyl Methacrylate)},
  journal = {Polymer Engineering & Science},
  year = {2026},
  doi = {10.1002/pen.71013}
}
Kostenlos starten →