EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Investigation in Poly (Lactic Acid)‐Cellulose Acetate Composites Used for the Controlled Release of Potassium Fertilizers

Kaleum Meaney, Ke Gong, Yinshi Lu, Yin Zhu, Lena Madden, Declan Devine, Michael Gaffney, Crevan O'Donnell, Mario Culebras, Maurice N. Collins, Yuanyuan Chen

Polymer Engineering & Science · 2026-11 · 66 (11) · 8244-8262

DOI: 10.1002/pen.70825 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 16.08.2026. Verfasst von Kaleum Meaney und 10 weiteren Autor:innen. Die Arbeit nennt 97 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Agriculture, Food and the Marine, Ireland, Science Foundation Ireland, HORIZON EUROPE Innovative Europe.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biodegradable polymer–based controlled‐release fertilizers (CRFs) offer an environmentally friendly approach to enhancing nutrient use efficiency while minimizing ecological impacts. In this study, poly (lactic acid) (PLA), cellulose acetate (CA), and their blends were investigated as carrier matrices for potassium (K + ). Composites containing 10 wt% potassium sulfate (KS) were produced by melt compounding, followed by comprehensive characterization of their physical, thermal, rheological, mechanical, and K + release performances. The density results confirmed uniform dispersion of KS throughout all formulations. Melt flow index and rheological behaviors revealed that CA content governed melt fluidity, while KS slightly reduced viscosity without compromising processability. Differential scanning calorimetry showed that increasing CA content suppressed PLA crystallinity (from 4% to 2.9% for the blends with no KS loaded and from 5.4% to 3.7% for KS blends) and promoted predominantly amorphous structures, with CA further modulating chain mobility depending on the material composition. The tensile behaviors indicated that PLA contributed strength and stiffness, while CA enhanced ductility; however, limited interfacial compatibility resulted in non‐linear responses, and KS incorporation caused a moderate decline in tensile strength (~17.4%). The K + release studies demonstrated strong dependence on both polymer composition and release environment, where PLA40‐CA60/10% KS exhibited enhanced and tunable K + release, while soil condition produced slower and more complicated release profiles ( n values > 0.5) compared with water condition ( n values < 0.5). Overall, these findings demonstrate that PLA–CA composites effectively mitigate nutrient losses from leaching and percolation, while offering excellent processability and environmental sustainability.

Förderung

  • Department of Agriculture, Food and the Marine, Ireland
  • Science Foundation Ireland
  • HORIZON EUROPE Innovative Europe

Zitieren

APA

Meaney, K., Gong, K., Lu, Y., Zhu, Y., Madden, L., Devine, D., Gaffney, M., O'Donnell, C., Culebras, M., Collins, M. N., & Chen, Y. (2026). An Investigation in Poly (Lactic Acid)‐Cellulose Acetate Composites Used for the Controlled Release of Potassium Fertilizers. Polymer Engineering & Science, 66(11), 8244-8262. https://doi.org/10.1002/pen.70825

Vancouver

Meaney K, Gong K, Lu Y, Zhu Y, Madden L, Devine D, et al. An Investigation in Poly (Lactic Acid)‐Cellulose Acetate Composites Used for the Controlled Release of Potassium Fertilizers. Polymer Engineering & Science. 2026;66(11):8244-8262. doi:10.1002/pen.70825

BibTeX
@article{Meaney2026,
  author = {Meaney, Kaleum and Gong, Ke and Lu, Yinshi and Zhu, Yin and Madden, Lena and Devine, Declan and Gaffney, Michael and O'Donnell, Crevan and Culebras, Mario and Collins, Maurice N. and Chen, Yuanyuan},
  title = {An Investigation in Poly (Lactic Acid)‐Cellulose Acetate Composites Used for the Controlled Release of Potassium Fertilizers},
  journal = {Polymer Engineering & Science},
  year = {2026},
  volume = {66},
  number = {11},
  pages = {8244--8262},
  doi = {10.1002/pen.70825}
}
Kostenlos starten →