EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Ultrasound‐Assisted Epoxy Resin Curing Monitored by Impedance Spectroscopy

Daniel Csehngeri, Anoush Poursartip, Edmond Cretu

Polymer Engineering & Science · 2026-08 · 66 (8) · 5730-5741

DOI: 10.1002/pen.70604 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 14.05.2026. Verfasst von Daniel Csehngeri und 2 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Epoxy resins are widely used in aerospace and automotive manufacturing as structural adhesives and matrices for carbon fiber–reinforced polymers (CFRPs), but their curing is often time‐consuming and sensitive to processing conditions. This study investigates the influence of ultrasonic energy on epoxy resin curing and demonstrates continuous, non‐destructive monitoring of cure progression using impedance spectroscopy over a relevant frequency range. While conventional approaches using temperature measurements combined with cure‐kinetics models already allow accurate estimation of the degree of cure, dielectric measurements provide a direct, continuous, and non‐destructive probe of the evolving material state through changes in capacitance and resistance. These dielectric parameters were correlated with a cure kinetics model, validated by DSC, enabling accurate mapping of the time‐dependent evolution of degree of cure, even at low ultrasound power levels, where the effective reaction rate is increased without altering the cure kinetics model structure. Experiments in an ultrasonic bath show that mechanical vibrational energy accelerates cure primarily through localized heating within the resin, rather than through bulk conductive heating of the sample arising from the ultrasonic equipment, which has been the dominant effect reported in previous studies. The results highlight the potential of ultrasound‐assisted curing combined with in situ impedance monitoring to reduce curing time, mitigate defect formation, and improve process control in CFRP manufacturing.

Zitieren

APA

Csehngeri, D., Poursartip, A., & Cretu, E. (2026). Ultrasound‐Assisted Epoxy Resin Curing Monitored by Impedance Spectroscopy. Polymer Engineering & Science, 66(8), 5730-5741. https://doi.org/10.1002/pen.70604

Vancouver

Csehngeri D, Poursartip A, Cretu E. Ultrasound‐Assisted Epoxy Resin Curing Monitored by Impedance Spectroscopy. Polymer Engineering & Science. 2026;66(8):5730-5741. doi:10.1002/pen.70604

BibTeX
@article{Csehngeri2026,
  author = {Csehngeri, Daniel and Poursartip, Anoush and Cretu, Edmond},
  title = {Ultrasound‐Assisted Epoxy Resin Curing Monitored by Impedance Spectroscopy},
  journal = {Polymer Engineering & Science},
  year = {2026},
  volume = {66},
  number = {8},
  pages = {5730--5741},
  doi = {10.1002/pen.70604}
}
Kostenlos starten →