EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of UV ‐Thermal Exposure Sequence on the Compressive Performance of FDM ‐Printed Polymers

Eugene Anachebe, Naser A. Alsaleh, Hany Hassanin, Mahmoud A. El‐Sayed, Abdullah A. Elfar, Khamis Essa

Polymer Engineering & Science · 2026-06 · 66 (6) · 4107-4126

DOI: 10.1002/pen.70480 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 07.04.2026. Verfasst von Eugene Anachebe und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Imam Mohammed Ibn Saud Islamic University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultraviolet (UV) radiation and elevated temperatures can alter the compressive performance of fused deposition modeled (FDM) polymers, but the combined effects, and especially the order of exposure, have not been systematically investigated under compressive loading. This study quantifies the sequence‐dependent effects of UV‐A exposure and thermal exposure on the compressive behavior of Nylon‐CF, PLA, and TPU. Using response surface methodology, UV duration (8−16 h), thermal exposure temperature (80°C–140°C), and thermal exposure time (1–5 h) were varied, with treatment sequence as a categorical factor. Thermal exposure followed by UV exposure gave the most favorable Nylon‐CF response, delivering up to 27% higher compressive strength, whereas UV exposure followed by thermal exposure generally reduced peak strength and promoted higher deformation. PLA showed modest strength gains below 5%, but selected UV‐first schedules preserved or increased stiffness. TPU showed the opposite trend, with both sequences degrading compressive performance, particularly when UV exposure preceded thermal exposure, thereby identifying conditions that should be avoided. Scanning electron microscopy provided mesostructural evidence of sequence‐driven changes, including reduced porosity and improved interlayer fusion in Nylon‐CF and void coalescence in severely treated PLA. These findings establish treatment sequence as a key design parameter for FDM polymers.

Förderung

  • Imam Mohammed Ibn Saud Islamic University

Zitieren

APA

Anachebe, E., Alsaleh, N. A., Hassanin, H., El‐Sayed, M. A., Elfar, A. A., & Essa, K. (2026). Effects of UV ‐Thermal Exposure Sequence on the Compressive Performance of FDM ‐Printed Polymers. Polymer Engineering & Science, 66(6), 4107-4126. https://doi.org/10.1002/pen.70480

Vancouver

Anachebe E, Alsaleh NA, Hassanin H, El‐Sayed MA, Elfar AA, Essa K. Effects of UV ‐Thermal Exposure Sequence on the Compressive Performance of FDM ‐Printed Polymers. Polymer Engineering & Science. 2026;66(6):4107-4126. doi:10.1002/pen.70480

BibTeX
@article{Anachebe2026,
  author = {Anachebe, Eugene and Alsaleh, Naser A. and Hassanin, Hany and El‐Sayed, Mahmoud A. and Elfar, Abdullah A. and Essa, Khamis},
  title = {Effects of UV ‐Thermal Exposure Sequence on the Compressive Performance of FDM ‐Printed Polymers},
  journal = {Polymer Engineering & Science},
  year = {2026},
  volume = {66},
  number = {6},
  pages = {4107--4126},
  doi = {10.1002/pen.70480}
}
Kostenlos starten →