Indirect Visualization and Prediction of Specific Volume Distribution in Injection‐Molded Polycarbonate Containing Trace Carbon Black Particles
Polymer Engineering & Science · 2026-06 · 66 (6) · 4080-4094
DOI: 10.1002/pen.70478 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 20.03.2026. Verfasst von Jian Wang und 5 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben.
Abstract (Originalsprache)
Specific volume of polymer varies with pressure and temperature during injection molding and strongly correlates to local shrinkage and final warpage deformation of parts. Non‐destructive measurement of spatial specific volume distribution in finished injection‐molded parts remains challenging. This study presents a particle image visualization method to map specific volume distribution indirectly. Trace small amounts of carbon black (CB) were dispersed in polycarbonate (PC) as optical markers. The injection‐molded PC/CB flat plate as the standard sample was sectioned into 10 × 10 mm 2 specimens for specific volume measurement and CB particle distribution analysis. The specific volume distribution was characterized and correlated with the digital‐image‐processed CB particle distribution. A strong linear correlation was established between CB particle area fraction and local specific volume. Pearson correlation coefficient ( r ) was 0.8988. The resulting regression model enables direct prediction of specific volume in other injection‐molded parts using only CB area fraction obtained via non‐destructive imaging. Validation on a complex‐geometry PC/0.01wt%CB fan‐shaped part yielded excellent agreement ( r = 0.9867, RMSE = 0.000244). This optical tracer method provides a practical, non‐destructive tool for characterizing specific volume heterogeneity in injection‐molded parts and can be extended to other transparent or semi‐transparent polymers and geometries.
Zitieren
APA
Wang, J., Jiang, B., Cheng, Y., Liang, Y., Yang, W., & Wang, J. (2026). Indirect Visualization and Prediction of Specific Volume Distribution in Injection‐Molded Polycarbonate Containing Trace Carbon Black Particles. Polymer Engineering & Science, 66(6), 4080-4094. https://doi.org/10.1002/pen.70478
Vancouver
Wang J, Jiang B, Cheng Y, Liang Y, Yang W, Wang J. Indirect Visualization and Prediction of Specific Volume Distribution in Injection‐Molded Polycarbonate Containing Trace Carbon Black Particles. Polymer Engineering & Science. 2026;66(6):4080-4094. doi:10.1002/pen.70478
BibTeX
@article{Wang2026,
author = {Wang, Jian and Jiang, Bo and Cheng, Yue and Liang, Yucan and Yang, Weimin and Wang, Jianfeng},
title = {Indirect Visualization and Prediction of Specific Volume Distribution in Injection‐Molded Polycarbonate Containing Trace Carbon Black Particles},
journal = {Polymer Engineering & Science},
year = {2026},
volume = {66},
number = {6},
pages = {4080--4094},
doi = {10.1002/pen.70478}
}
EUVIMED