EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Overcoming Challenges in 3D Printing of Polyolefins and Their Composites: A Review on Strategies for Improved Printability and Performance

Malik Hassan, Philip McMorran, Marwan Eid, Julia Blair, Amar K. Mohanty, Manjusri Misra

Polymer Engineering & Science · 2026-05 · 66 (5) · 3100-3141

DOI: 10.1002/pen.70410 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 24.02.2026. Verfasst von Malik Hassan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 154 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyolefins such as polyethylene and polypropylene are among the most widely produced thermoplastics globally due to their low cost, chemical resistance, and favorable mechanical properties. Despite their industrial importance, these polymers pose significant challenges in additive manufacturing, particularly in extrusion‐based techniques like fused deposition modeling and fused granulate fabrication. Their semi‐crystalline nature leads to shrinkage and warpage during cooling, while their low surface energy results in poor interlayer and bed adhesion. This review provides a comprehensive overview of the molecular structure, crystallinity, and catalyst systems of polyolefins, highlighting how these factors influence printability and performance. Strategies for mitigating shrinkage and warpage are critically examined, including thermal control, polymer blending, and the use of nucleating agents and fillers. Adhesion improvement methods such as the addition of compatibilizers, surface treatments, crosslinking, and thermal processing are also discussed. This review evaluates the use of recycled polyolefins and proposes material and process modifications aimed at overcoming challenges with degradation and inconsistency. Furthermore, the role of functional fillers, including talc, calcium carbonate, biocarbon, and nanoclays, is explored in the context of enhancing mechanical strength, dimensional stability, and sustainability. Through the integration of materials science, process engineering, and sustainable design, this review offers practical insights to advance the application of polyolefins in high‐performance additive manufacturing.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Hassan, M., McMorran, P., Eid, M., Blair, J., Mohanty, A. K., & Misra, M. (2026). Overcoming Challenges in 3D Printing of Polyolefins and Their Composites: A Review on Strategies for Improved Printability and Performance. Polymer Engineering & Science, 66(5), 3100-3141. https://doi.org/10.1002/pen.70410

Vancouver

Hassan M, McMorran P, Eid M, Blair J, Mohanty AK, Misra M. Overcoming Challenges in 3D Printing of Polyolefins and Their Composites: A Review on Strategies for Improved Printability and Performance. Polymer Engineering & Science. 2026;66(5):3100-3141. doi:10.1002/pen.70410

BibTeX
@article{Hassan2026,
  author = {Hassan, Malik and McMorran, Philip and Eid, Marwan and Blair, Julia and Mohanty, Amar K. and Misra, Manjusri},
  title = {Overcoming Challenges in 3D Printing of Polyolefins and Their Composites: A Review on Strategies for Improved Printability and Performance},
  journal = {Polymer Engineering & Science},
  year = {2026},
  volume = {66},
  number = {5},
  pages = {3100--3141},
  doi = {10.1002/pen.70410}
}
Kostenlos starten →