EUVIMEDEUVIMED entdecken
Crossref

Effect of SEBS‐g‐MA Compatibilizer in Glass Fiber Reinforced Polyamide ( PAGF ) and Recycled Polyvinyl Butyral ( rPVB ) Blends

Isabel Ariadna Carmona‐Cervantes, Ulises Figueroa‐López, Jorge Alberto Medina, Andrea Guevara‐Morales

Polymer Engineering & Science · 2026-03 · 66 (3) · 1927-1943

DOI: 10.1002/pen.70317 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 15.12.2025. Verfasst von Isabel Ariadna Carmona‐Cervantes und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 66 Literaturangaben. Gefördert von: Instituto Tecnológico y de Estudios Superiores de Monterrey.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of high‐value applications for recycled polymers is a growing priority in the automotive sector. Recycled polyvinyl butyral (rPVB), widely recovered from laminated windshields, has shown potential as a solid lubricant in glass fiber‐reinforced polyamide (PAGF). However, PAGF/rPVB blends are inherently immiscible, limiting their mechanical performance. This study investigates the effect of low concentrations (1–10 wt.%) of styrene‐ethylene‐butylene‐styrene grafted with maleic anhydride (SEBS‐g‐MA) as a compatibilizer to improve the interfacial compatibility and miscibility of PAGF/rPVB blends. Ternary PAGF/rPVB/SEBS‐g‐MA blends were prepared by melt mixing and injection molding and characterized using spectroscopic, microscopic, thermal, and mechanical methods. SEBS‐g‐MA promoted chemical interactions between hydroxyl groups in rPVB, carboxyl groups in SEBS‐g‐MA, and amino groups in PAGF, enhancing interfacial adhesion and morphological homogeneity. Even at 1 wt.%, SEBS‐g‐MA improved compatibility, evidenced by reduced phase separation and chemical bonds. At 5 and 10 wt.%, signs of partial miscibility emerged, including smaller second‐phase domains, sharper and lower‐temperature tan δ peaks, and increased crystallinity. Mechanical strength and stiffness decreased with increasing SEBS‐g‐MA content due to the lower mechanical properties of SEBS‐g‐MA and rPVB. Blends with 5 and 10 wt.% SEBS‐g‐MA showed the highest compatibility and partial miscibility, but also the greatest modulus reductions. In contrast, 1 and 3 wt.% blends retained more stiffness while benefiting from improved compatibility. These results highlight the trade‐off between favored compatibility/miscibility and mechanical properties while demonstrating SEBS‐g‐MA potential to enable recycled blends for tribological applications where interfacial stability, damping, and dispersion of lubricating phases are prioritized over high modulus.

Förderung

  • Instituto Tecnológico y de Estudios Superiores de Monterrey

Zitieren

APA

Carmona‐Cervantes, I. A., Figueroa‐López, U., Medina, J. A., & Guevara‐Morales, A. (2026). Effect of SEBS‐g‐MA Compatibilizer in Glass Fiber Reinforced Polyamide ( PAGF ) and Recycled Polyvinyl Butyral ( rPVB ) Blends. Polymer Engineering & Science, 66(3), 1927-1943. https://doi.org/10.1002/pen.70317

Vancouver

Carmona‐Cervantes IA, Figueroa‐López U, Medina JA, Guevara‐Morales A. Effect of SEBS‐g‐MA Compatibilizer in Glass Fiber Reinforced Polyamide ( PAGF ) and Recycled Polyvinyl Butyral ( rPVB ) Blends. Polymer Engineering & Science. 2026;66(3):1927-1943. doi:10.1002/pen.70317

BibTeX
@article{CarmonaCervantes2026,
  author = {Carmona‐Cervantes, Isabel Ariadna and Figueroa‐López, Ulises and Medina, Jorge Alberto and Guevara‐Morales, Andrea},
  title = {Effect of SEBS‐g‐MA Compatibilizer in Glass Fiber Reinforced Polyamide ( PAGF ) and Recycled Polyvinyl Butyral ( rPVB ) Blends},
  journal = {Polymer Engineering & Science},
  year = {2026},
  volume = {66},
  number = {3},
  pages = {1927--1943},
  doi = {10.1002/pen.70317}
}
Kostenlos starten →