EUVIMEDEUVIMED entdecken
Crossref

Development of High‐Performance Multiphase Elastomers: Synergistic Design of MXene / XNBR / EPDM ‐g‐ MAH / EPDM Blends

Mohammad Javad Azizli, Hengameh Honarkar, Nahal Barzegar Bagheri, Somayeh Parham, Mohammad Bagher Zarei, Masoud Mokhtary

Polymer Engineering & Science · 2026-01 · 66 (1) · 576-594

DOI: 10.1002/pen.70241 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 09.11.2025. Verfasst von Mohammad Javad Azizli und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 50 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this research, the synthesis of novel nanocomposites based on various blends of XNBR/EPDM in different ratios (0, 20, 40, 60, and 100 phr) containing (0, 0.2, 0.4, 0.6, 0.8, and 1.1 phr) of MXene, using a two‐roll mill, has been investigated. The evaluation of the influence of the EPDM‐g‐MAH (maleic anhydride‐grafted EPDM), compatibilizer, and the role of MXene on morphology, curing behavior, mechanical, and rheological properties was in the road map of this research. The curing characteristics of the nanocomposites were analyzed using a moving die rheometer. Additionally, the microstructure of the samples was examined using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The results showed that increasing the MXene content in the composite resulted in higher torque and extended curing and scorch times. Fracture surface analysis revealed that EPDM‐g‐MAH enhanced the dispersion of MXene within the XNBR/EPDM matrix, resulting in a uniform distribution with minimal aggregation. Furthermore, the incorporation of MXene contributed to a rougher fracture surface morphology. The incorporation of EPDM‐g‐MAH and higher MXene loadings also reduced the dispersed phase size of EPDM in the XNBR matrix, resulting in a more homogeneous dispersion. Moreover, the nanocomposites exhibited enhanced properties with increasing compatibilizer and MXene content.

Zitieren

APA

Azizli, M. J., Honarkar, H., Bagheri, N. B., Parham, S., Zarei, M. B., & Mokhtary, M. (2026). Development of High‐Performance Multiphase Elastomers: Synergistic Design of MXene / XNBR / EPDM ‐g‐ MAH / EPDM Blends. Polymer Engineering & Science, 66(1), 576-594. https://doi.org/10.1002/pen.70241

Vancouver

Azizli MJ, Honarkar H, Bagheri NB, Parham S, Zarei MB, Mokhtary M. Development of High‐Performance Multiphase Elastomers: Synergistic Design of MXene / XNBR / EPDM ‐g‐ MAH / EPDM Blends. Polymer Engineering & Science. 2026;66(1):576-594. doi:10.1002/pen.70241

BibTeX
@article{Azizli2026,
  author = {Azizli, Mohammad Javad and Honarkar, Hengameh and Bagheri, Nahal Barzegar and Parham, Somayeh and Zarei, Mohammad Bagher and Mokhtary, Masoud},
  title = {Development of High‐Performance Multiphase Elastomers: Synergistic Design of MXene / XNBR / EPDM ‐g‐ MAH / EPDM Blends},
  journal = {Polymer Engineering & Science},
  year = {2026},
  volume = {66},
  number = {1},
  pages = {576--594},
  doi = {10.1002/pen.70241}
}
Kostenlos starten →