EUVIMEDEUVIMED entdecken
Crossref

Effect of Different Accelerator Systems on the Processing, Mechanical, Dynamic, and Network Properties of Natural Rubber Vulcanizates

Vaibhav Kumar Arya, Tuhin Saha, Debabrata Ganguly, Sambhu Bhadra, Sujith S. Nair, Santanu Chattopadhyay

Polymer Engineering & Science · 2026-02 · 66 (2) · 703-715

DOI: 10.1002/pen.70181 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 14.11.2025. Verfasst von Vaibhav Kumar Arya und 5 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 30 Literaturangaben. Gefördert von: Ministry of Education, India, Indian Institute of Technology Kharagpur.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, the efficiency of various primary and secondary accelerators on natural rubber (NR) vulcanizates was compared. Twelve formulations were prepared with six accelerators in a conventional sulfur system. The effects on rheological, mechanical, dynamic mechanical, abrasion, and set properties were evaluated. Chemical probe treatments were used to study crosslink types, and their influence on crosslink density was also examined. The data, including crosslink density and distribution types for various curatives, were correlated with mechanical and aging properties. Accelerators showed synergistic effects, producing either higher or lower physical properties than expected. The CBS+TMTD system exhibited the fastest cure rate index (CRI = 34.6 min −1 ), more than double that of CBS+DPG (13.4 min −1 ) TMTD‐based systems achieved a modulus of 11.5 MPa and a cure rate index (CRI) of 34.6 min −1 . TMTD‐based binary systems achieved the highest modulus at 300% elongation (≈11.5 MPa), compared to 8.1 MPa for MBTS+ZBEC. CBS‐based vulcanizates showed the best retention of properties after aging, with only ~8% reduction in tensile strength compared to ~17% for TBBS+ZBEC. Results also indicated that less polar accelerators formed crosslinks with longer sulfur chains, that is, more polysulfidic in nature, while accelerators with higher polarity produced networks with shorter sulfur crosslinks.

Förderung

  • Ministry of Education, India
  • Indian Institute of Technology Kharagpur

Zitieren

APA

Arya, V. K., Saha, T., Ganguly, D., Bhadra, S., Nair, S. S., & Chattopadhyay, S. (2026). Effect of Different Accelerator Systems on the Processing, Mechanical, Dynamic, and Network Properties of Natural Rubber Vulcanizates. Polymer Engineering & Science, 66(2), 703-715. https://doi.org/10.1002/pen.70181

Vancouver

Arya VK, Saha T, Ganguly D, Bhadra S, Nair SS, Chattopadhyay S. Effect of Different Accelerator Systems on the Processing, Mechanical, Dynamic, and Network Properties of Natural Rubber Vulcanizates. Polymer Engineering & Science. 2026;66(2):703-715. doi:10.1002/pen.70181

BibTeX
@article{Arya2026,
  author = {Arya, Vaibhav Kumar and Saha, Tuhin and Ganguly, Debabrata and Bhadra, Sambhu and Nair, Sujith S. and Chattopadhyay, Santanu},
  title = {Effect of Different Accelerator Systems on the Processing, Mechanical, Dynamic, and Network Properties of Natural Rubber Vulcanizates},
  journal = {Polymer Engineering & Science},
  year = {2026},
  volume = {66},
  number = {2},
  pages = {703--715},
  doi = {10.1002/pen.70181}
}
Kostenlos starten →