Precision in Rubber Seal Lifetime Prediction: The Critical Role of Aspect Ratio
Polymer Engineering & Science · 2025-12 · 65 (12) · 6781-6797
DOI: 10.1002/pen.70164 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 27.09.2025. Verfasst von Elias Luiz de Souza und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordenação de Aperfeiçoamento de Pessoal de Nível Superior.
Abstract (Originalsprache)
Rubber seals are widely used in industry, with reliability assessed via aging studies adhering to international standards. However, sealing components often have high aspect ratios, with length exceeding height. This study shows how aspect ratio affects aging behavior, potentially leading to non‐representative lifetime predictions under standard conditions. NBR and EPDM rubber were submitted to thermo‐oxidative cycles with aspect ratios (AR) of 2.5, 7.5, 30, and 60 with temperatures ranging from 80°C to 170°C, and up to 180 days. Specimens were obtained from commercial gaskets and were evaluated employing compression set, indentation modulus, hardness, crosslink density, and calorimetric analyses. Under 140°C, NBR is more susceptible to aging with greater kinetics of CS evolution, hardness, crosslink density, and variation in Tg. The higher reaction rate of NBR also makes it more prone to diffusion‐limited oxidation (DLO) from a temperature of 110°C, while for EPDM, DLO only appears at 170°C. The findings indicate that higher aspect ratios present enhanced resistance to thermo‐oxidative aging due to their longer diffusive path. For the prediction of sealing component service life, sample geometry with an aspect ratio equal to or exceeding 30 is proposed. The appropriate selection of test specimens can more accurately reflect the in‐service performance of these components, reducing unnecessary maintenance and material consumption.
Förderung
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Zitieren
APA
Souza, E. L. D., Zanzi, M. D. S., Paiva, K. V. D., Oliveira, J. L. G., Barra, G. M. D. O., & Dutra, G. B. (2025). Precision in Rubber Seal Lifetime Prediction: The Critical Role of Aspect Ratio. Polymer Engineering & Science, 65(12), 6781-6797. https://doi.org/10.1002/pen.70164
Vancouver
Souza ELD, Zanzi MDS, Paiva KVD, Oliveira JLG, Barra GMDO, Dutra GB. Precision in Rubber Seal Lifetime Prediction: The Critical Role of Aspect Ratio. Polymer Engineering & Science. 2025;65(12):6781-6797. doi:10.1002/pen.70164
BibTeX
@article{Souza2025,
author = {Souza, Elias Luiz de and Zanzi, Mateus de Sousa and Paiva, Kleber Vieira de and Oliveira, Jorge Luiz Goes and Barra, Guilherme Mariz de Oliveira and Dutra, Gabriel Benedet},
title = {Precision in Rubber Seal Lifetime Prediction: The Critical Role of Aspect Ratio},
journal = {Polymer Engineering & Science},
year = {2025},
volume = {65},
number = {12},
pages = {6781--6797},
doi = {10.1002/pen.70164}
}
EUVIMED