Intensification of polyethylene extrusion devolatilization based on extensional flow field
Polymer Engineering & Science · 2025-06 · 65 (6) · 3046-3058
DOI: 10.1002/pen.27197 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 07.04.2025. Verfasst von Yun Shuai und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.
Abstract (Originalsprache)
The dispersion between the polyethylene melt and additives is poor when using the conventional threaded elements, which limits the improvement of devolatilization efficiency. Therefore, in this work, the screw elements were studied and modified to create an extensional flow field to further enhance the removal of 1‐octene from LLDPE. The results show that after modulating the extruder mixing section from a shear‐dominated flow field to an extensional‐dominated flow field, the polyethylene devolatilization efficiency is significantly improved, which can be attributed to the following two aspects: (1) The polyethylene molecular chains have a lower degree of cross‐linking and a higher degree of orientation after the introduction of the extensional flow field, which helps the diffusion of volatile small molecules in the polyethylene melt; (2) The extensional‐dominated flow field is more favorable to the dispersion and mixing of additives in the polyethylene melt than the shear‐dominated flow field, which can provide a larger gas–liquid mass transfer area to improve the devolatilization efficiency. Highlights The extensional flow field in a twin‐screw extruder is created. The devolatilization of 1‐octene from LLDPE is enhanced by an extensional flow field. The mechanism of enhanced devolatilization by extensional flow field is revealed.
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
Zitieren
APA
Shuai, Y., Fang, Z., Huang, Z., Ren, C., Wang, J., & Yang, Y. (2025). Intensification of polyethylene extrusion devolatilization based on extensional flow field. Polymer Engineering & Science, 65(6), 3046-3058. https://doi.org/10.1002/pen.27197
Vancouver
Shuai Y, Fang Z, Huang Z, Ren C, Wang J, Yang Y. Intensification of polyethylene extrusion devolatilization based on extensional flow field. Polymer Engineering & Science. 2025;65(6):3046-3058. doi:10.1002/pen.27197
BibTeX
@article{Shuai2025,
author = {Shuai, Yun and Fang, Zibing and Huang, Zhengliang and Ren, Congjing and Wang, Jingdai and Yang, Yongrong},
title = {Intensification of polyethylene extrusion devolatilization based on extensional flow field},
journal = {Polymer Engineering & Science},
year = {2025},
volume = {65},
number = {6},
pages = {3046--3058},
doi = {10.1002/pen.27197}
}
EUVIMED