EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Design and evaluation of MOF ‐containing PCM materials for energy storage in textile applications

İnci Cenik, Burcu Oktay, Belma Gjergjizi Nallbani, Nilhan Kayaman‐Apohan

Polymer Engineering & Science · 2025-06 · 65 (6) · 2944-2954

DOI: 10.1002/pen.27190 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 28.03.2025. Verfasst von İnci Cenik und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on the successful incorporation of stearyl methacrylate (SMA)/glycidyl methacrylate (GMA) copolymer, together with paraffin, into metal–organic framework (MOF) structures. These structures were prepared using a simple and cost‐effective process as an alternative to challenging process conditions such as encapsulation. One of the biggest issues encountered in phase change materials (PCMs), the leakage problem, has been effectively eliminated thanks to this MOF structure. Results showed that the melting enthalpy increased from 50 to 119 J/g by increasing the amount of polymer and paraffin in the ZIF‐NH 2 structure. It was observed that the PCMs applied to textiles exhibited resistance to flow at elevated temperatures. As a result of epoxy‐amine reactions between the polymer and ZIF‐NH 2 , covalent binding was achieved on the textile surface, and no leakage was detected when the fabrics were heated up to 90°C at specific compositions. The incorporation of regular glycidyl functional groups into the structure facilitates their attachment to the textile surface without requiring additional components. In contrast, the long stearyl groups significantly enhance the thermal energy storage capacity. With a contact angle above 100°, the PCM coating also contributed to the formation of a hydrophobic fabric surface. These materials provide thermal comfort by dynamically responding to environmental temperature changes. This feature enables their use in smart textile applications as functional textile products requiring energy management. Highlights ZIF/poly(GMA‐co‐SMA) based PCMs were prepared. PCMs were covalently bonded to ZIF via epoxy‐amine reactions. PCMs were impregnated into textile materials. The fabrics exhibited a melting enthalpy of 50–119 J/g without leakage. The materials contribute to the advancement of smart textile applications.

Zitieren

APA

Cenik, İ., Oktay, B., Nallbani, B. G., & Kayaman‐Apohan, N. (2025). Design and evaluation of MOF ‐containing PCM materials for energy storage in textile applications. Polymer Engineering & Science, 65(6), 2944-2954. https://doi.org/10.1002/pen.27190

Vancouver

Cenik İ, Oktay B, Nallbani BG, Kayaman‐Apohan N. Design and evaluation of MOF ‐containing PCM materials for energy storage in textile applications. Polymer Engineering & Science. 2025;65(6):2944-2954. doi:10.1002/pen.27190

BibTeX
@article{Cenik2025,
  author = {Cenik, İnci and Oktay, Burcu and Nallbani, Belma Gjergjizi and Kayaman‐Apohan, Nilhan},
  title = {Design and evaluation of MOF ‐containing PCM materials for energy storage in textile applications},
  journal = {Polymer Engineering & Science},
  year = {2025},
  volume = {65},
  number = {6},
  pages = {2944--2954},
  doi = {10.1002/pen.27190}
}
Kostenlos starten →