Improved water resistance and air barrier performances of paper coated with polylactic acid/organoclay nanocomposites
Polymer Engineering & Science · 2025-04 · 65 (4) · 2068-2079
DOI: 10.1002/pen.27134 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 19.02.2025. Verfasst von Chenni Abdenour und 7 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
Paper packaging coated with synthetic materials raises major environmental and health concerns. As a response, new promising approaches consist of using sustainable coatings based on nano‐biocomposites. In this work, polylactic acid (PLA)/organoclays (OC) aqueous dispersions thickened by xanthan gum were applied on paper using the bar coating technique. Morphological and topographical analyses using scanning electron microscopy and laser confocal microscopy showed a smooth polymeric layer completely covering the fibrous and porous surface of the paper, resulting in a substantial improvement in the barrier properties. Water vapor transmission rates and water absorptivity had undergone a major decrease when coatings containing 3 and 5 wt% OC were used, while no significant difference was observed between the 1 wt% OC formulation and pure PLA. Moreover, coated paper showed no air porosity with 0 mL/min values recorded for all samples, thus confirming the morphology observations of the surfaces and cross‐sections. Additionally, the contact angle measurements indicated a slight decrease in the hydrophobicity of the base paper when coated with PLA and 1 wt% OC. However, this reduction was reversed with the addition of 3 and 5 wt% OC, restoring the hydrophobicity. Highlights Polylactic acid (PLA)/organoclay (OC) coatings sealed and covered completely the paper's surface. Water resistance of the base paper had a major improvement due to the coatings. The porous surface of the paper was successfully sealed, leading to no air porosity. Adding 3 and 5 wt% OC resulted in excellent barrier performances. PLA/OC coatings have the potential to replace synthetic paper coatings.
Förderung
- Natural Sciences and Engineering Research Council of Canada
Zitieren
APA
Abdenour, C., Eesaee, M., Chabot, B., Barnabé, S., Bley, J., Tolnai, B., Njamen, G., & Nguyen‐Tri, P. (2025). Improved water resistance and air barrier performances of paper coated with polylactic acid/organoclay nanocomposites. Polymer Engineering & Science, 65(4), 2068-2079. https://doi.org/10.1002/pen.27134
Vancouver
Abdenour C, Eesaee M, Chabot B, Barnabé S, Bley J, Tolnai B, et al. Improved water resistance and air barrier performances of paper coated with polylactic acid/organoclay nanocomposites. Polymer Engineering & Science. 2025;65(4):2068-2079. doi:10.1002/pen.27134
BibTeX
@article{Abdenour2025,
author = {Abdenour, Chenni and Eesaee, Mostafa and Chabot, Bruno and Barnabé, Simon and Bley, Julien and Tolnai, Balazs and Njamen, Guy and Nguyen‐Tri, Phuong},
title = {Improved water resistance and air barrier performances of paper coated with polylactic acid/organoclay nanocomposites},
journal = {Polymer Engineering & Science},
year = {2025},
volume = {65},
number = {4},
pages = {2068--2079},
doi = {10.1002/pen.27134}
}
EUVIMED