Influences of isothermal annealing post‐treatment on mechanical performances in fused deposition modeling manufactured short carbon fibrous PETG and PA composites
Polymer Engineering & Science · 2024-12 · 64 (12) · 6247-6264
DOI: 10.1002/pen.26984 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 25.09.2024. Verfasst von Zhaogui Wang und 2 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 62 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation, National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Fused deposition modeling (FDM) based large‐area additive manufacturing has advanced significantly, particularly for producing large parts with high‐performance short fibrous composites. To improve the mechanical performance of these manufactured parts, isothermal annealing is often employed as a post‐treatment for FDM‐produced components. Hence, this study examines the impact of isothermal annealing on the mechanical properties of short carbon fiber‐filled Polyamide 12 (PA12‐CF) and polyethylene terephthalate glycol (PETG‐CF). Samples are prepared using a customized high‐extrusion‐rate FDM (HFDM) system with varying key printing parameters (layer height and extrusion width). Three‐point bending tests are employed to assess the bending strength, modulus, and fracture deflection of the samples. Results show that annealing treatment significantly enhances the bending performance of PA12‐CF, with strength and modulus increasing by 27.8% and 31.2%, respectively. In contrast, PETG‐CF exhibits relatively minor improvements in bending strength (8.1%) and modulus (2.7%). Optical microscopy reveals that different printing parameters notably influence the alignment of short carbon fibers, affecting the mechanical properties, while the annealing treatment does not alter these parameter‐dependent trends. Finite element simulations further demonstrate that the presence of carbon fibers contributes to a progressive enhancement of the polymer matrix, which impacts mechanical improvement during annealing. Highlights High‐extrusion‐rate FDM is used to prepare PA12 and PETG composite samples. Annealing improves properties more in semi‐crystalline PA12‐CF samples. Meso‐structural analysis reveals that printing parameters play a crucial role. Short‐carbon‐fiber boosts strengths of the polymer matrix during annealing.
Förderung
- China Postdoctoral Science Foundation
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
- Department of Education of Liaoning Province
Zitieren
APA
Wang, Z., Zhang, B., & Wang, J. (2024). Influences of isothermal annealing post‐treatment on mechanical performances in fused deposition modeling manufactured short carbon fibrous PETG and PA composites. Polymer Engineering & Science, 64(12), 6247-6264. https://doi.org/10.1002/pen.26984
Vancouver
Wang Z, Zhang B, Wang J. Influences of isothermal annealing post‐treatment on mechanical performances in fused deposition modeling manufactured short carbon fibrous PETG and PA composites. Polymer Engineering & Science. 2024;64(12):6247-6264. doi:10.1002/pen.26984
BibTeX
@article{Wang2024,
author = {Wang, Zhaogui and Zhang, Baoyi and Wang, Jinze},
title = {Influences of isothermal annealing post‐treatment on mechanical performances in fused deposition modeling manufactured short carbon fibrous PETG and PA composites},
journal = {Polymer Engineering & Science},
year = {2024},
volume = {64},
number = {12},
pages = {6247--6264},
doi = {10.1002/pen.26984}
}
EUVIMED