EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Improved pressure‐sensitive adhesive performance using carboxylated cellulose nanocrystals via blending

Maryam Movafagh, Kelly M. Meek, Parisa Bayat, Emily D. Cranston, Michael Cunningham, Pascale Champagne, Timothy Morse, Michael Kiriakou, Sean George, Marc A. Dubé

Polymer Engineering & Science · 2024-02 · 64 (2) · 798-816

DOI: 10.1002/pen.26585 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 27.11.2023. Verfasst von Maryam Movafagh und 9 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carboxylated cellulose nanocrystals (cCNCs) were blended with high‐quality commercial latex to enhance key pressure‐sensitive adhesive (PSA) properties: tack, peel strength, and shear adhesion. Initially, a 2 5–1 fractional factorial design was used to evaluate the effect of five factors: cCNC type (never‐dried vs. dried re‐dispersed), the use of sonication to disperse the cCNC, cCNC loading, blend temperature, and mixing speed. The regression analysis identified optimal blend conditions and the three most significant factors. It was found that increasing mixing speed had the strongest positive impact on all three PSA properties. A subsequent design of experiments looked at using a different mixing system—a homogenizer—and the data were viewed relative to the mixing power. Further increase in mixing beyond the original design framework led to increase in shear adhesion but decreased tack and peel strength. Nevertheless, in all cases, the PSA properties of the blended latexes exceeded that of the base‐case latex without cCNCs. The second factor of importance was the cCNC loading. The blending of cCNCs at levels beginning at 0.5 phm (parts per hundred parts monomer) led to the simultaneous improvement in all three PSA properties compared to the base‐case latex. The 1 phm level appeared to provide the best impact on the PSA properties. Finally, the need to sonicate the cCNCs dispersions before blending was significant. The results were further supported by rheological measurements, which demonstrated significant increase in viscosity with cCNC addition. This study clearly demonstrates the effectiveness of cCNC blending to improve all PSA properties simultaneously and provides practical insights for industrial‐scale application.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Movafagh, M., Meek, K. M., Bayat, P., Cranston, E. D., Cunningham, M., Champagne, P., Morse, T., Kiriakou, M., George, S., & Dubé, M. A. (2024). Improved pressure‐sensitive adhesive performance using carboxylated cellulose nanocrystals via blending. Polymer Engineering & Science, 64(2), 798-816. https://doi.org/10.1002/pen.26585

Vancouver

Movafagh M, Meek KM, Bayat P, Cranston ED, Cunningham M, Champagne P, et al. Improved pressure‐sensitive adhesive performance using carboxylated cellulose nanocrystals via blending. Polymer Engineering & Science. 2024;64(2):798-816. doi:10.1002/pen.26585

BibTeX
@article{Movafagh2024,
  author = {Movafagh, Maryam and Meek, Kelly M. and Bayat, Parisa and Cranston, Emily D. and Cunningham, Michael and Champagne, Pascale and Morse, Timothy and Kiriakou, Michael and George, Sean and Dubé, Marc A.},
  title = {Improved pressure‐sensitive adhesive performance using carboxylated cellulose nanocrystals via blending},
  journal = {Polymer Engineering & Science},
  year = {2024},
  volume = {64},
  number = {2},
  pages = {798--816},
  doi = {10.1002/pen.26585}
}
Kostenlos starten →