New insights on the layer uniformity of multilayered films produced by coextrusion with interfacial surface generators
Polymer Engineering & Science · 2024-02 · 64 (2) · 675-688
DOI: 10.1002/pen.26576 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 07.12.2023. Verfasst von Marcelo Matos Martins und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 31 Literaturangaben.
Abstract (Originalsprache)
Polymer coextrusion is a manufacturing process whereby at least two polymer melts feed a die to form an extrudate made up of different layers, typically up to 12, to achieve a better product performance. Extruded films with hundreds or thousands of layers can be produced by using sequences of layer multipliers, also known as interfacial surface generators (ISG), at the die inlet. Each ISG splits, stacks, and merges the flow by means of various geometrical channel transformations (GT), in such a way that the number of layers at the outlet is doubled. However, in practice, the thicknesses of the individual layers generated after each transformation are often non‐uniform. This work deals with the numerical simulation of multilayer co‐extrusion of Newtonian polymer melts, aiming at providing new insights on the influence of the ISG geometry on the layer uniformity. It was found that depending on the combination of GT taking place, uneven layers may form due to the development of unsymmetrical velocity profiles along the direction perpendicular to the fluid interface. From this information, improved ISG dies, capable of producing coextruded films with uniform layer distribution, are proposed and assessed numerically. Highlights The polymer coextrusion process produces multilayer products. Extruded films can be produced using Interfacial surface generators (ISG). Polymers flow through ISG by several channel geometric transformations (GTs). Polymer melts flow through ISG undergoing various channel geometric transformations (GTs). Non‐uniform layers can be generated in the ISG. ISG performance can be improved when GTs are thoughtfully combined.
Zitieren
APA
Martins, M. M., Javadi, S., Covas, J. A., Carneiro, O. S., & Nóbrega, J. M. (2024). New insights on the layer uniformity of multilayered films produced by coextrusion with interfacial surface generators. Polymer Engineering & Science, 64(2), 675-688. https://doi.org/10.1002/pen.26576
Vancouver
Martins MM, Javadi S, Covas JA, Carneiro OS, Nóbrega JM. New insights on the layer uniformity of multilayered films produced by coextrusion with interfacial surface generators. Polymer Engineering & Science. 2024;64(2):675-688. doi:10.1002/pen.26576
BibTeX
@article{Martins2024,
author = {Martins, Marcelo Matos and Javadi, Sara and Covas, José António and Carneiro, Olga Sousa and Nóbrega, João Miguel},
title = {New insights on the layer uniformity of multilayered films produced by coextrusion with interfacial surface generators},
journal = {Polymer Engineering & Science},
year = {2024},
volume = {64},
number = {2},
pages = {675--688},
doi = {10.1002/pen.26576}
}
EUVIMED