EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Material extrusion additive manufacturing of dual material composite thermoset silicone components

Lachlan M. Peeke, Wenbo Liu, Mookkan Periyasamy, Ronald R. Campbell, Elizabeth Sassano, Wojciech J. Hajduczek, Michael A. Hickner

Polymer Engineering & Science · 2024-01 · 64 (1) · 218-230

DOI: 10.1002/pen.26541 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 17.11.2023. Verfasst von Lachlan M. Peeke und 6 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) is a disruptive manufacturing process that gives designers freedom to create highly complex shapes through free‐form fabrication. The majority of polymers used in extrusion AM are thermoplastics because they are easy to process in affordable machines. While there are a number of moderate modulus thermoplastics in regular use in AM, thermoplastics are known to weaken with increases in temperature or exposure to solvents and many commodity thermoplastics used in AM are brittle. On the other hand, there are few elastomers, and even fewer elastomer reinforcement schemes, that are accessible using standard AM technologies. In this work, we report a novel dual extrusion process that integrates elastomeric silicone with reinforcing thermoplastic. By developing and demonstrating a dual extrusion 3D printer that can process common thermoplastics with commercially available thermosetting silicones, new types of composite elastomers are reported with good mechanical performance. The 0°/20°/−20° grid pattern thermoplastic reinforced samples achieved 2.5 MPa tensile strength in low extension region (0.5 strain), which improves the initial stiffness of the composite component. Desired mechanical responses of composite structures can be realized by tuning the reinforcement volume ratio and infill percentages, and applying various types of reinforcement mesh patterns and thermoplastics. Highlights A dual extrusion process integrates fus filament fabrication and direct ink writing technologies. Thermoplastic reinforced silicone composite with stiff/soft properties. Tunable volume ratio, infill percentage, mesh pattern, and material option.

Zitieren

APA

Peeke, L. M., Liu, W., Periyasamy, M., Campbell, R. R., Sassano, E., Hajduczek, W. J., & Hickner, M. A. (2024). Material extrusion additive manufacturing of dual material composite thermoset silicone components. Polymer Engineering & Science, 64(1), 218-230. https://doi.org/10.1002/pen.26541

Vancouver

Peeke LM, Liu W, Periyasamy M, Campbell RR, Sassano E, Hajduczek WJ, et al. Material extrusion additive manufacturing of dual material composite thermoset silicone components. Polymer Engineering & Science. 2024;64(1):218-230. doi:10.1002/pen.26541

BibTeX
@article{Peeke2024,
  author = {Peeke, Lachlan M. and Liu, Wenbo and Periyasamy, Mookkan and Campbell, Ronald R. and Sassano, Elizabeth and Hajduczek, Wojciech J. and Hickner, Michael A.},
  title = {Material extrusion additive manufacturing of dual material composite thermoset silicone components},
  journal = {Polymer Engineering & Science},
  year = {2024},
  volume = {64},
  number = {1},
  pages = {218--230},
  doi = {10.1002/pen.26541}
}
Kostenlos starten →