Mechanical properties of isotactic polypropylene with nodular or spherulite morphologies
Polymer Engineering & Science · 2023-12 · 63 (12) · 4043-4050
DOI: 10.1002/pen.26504 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 29.09.2023. Verfasst von Yuta Fukuda und 2 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 17 Literaturangaben.
Abstract (Originalsprache)
α‐ form crystalline isotactic polypropylene (PP) was prepared by two methods: quenching from the melt state at slow or high crystallization rates. The mechanical properties of the resulting PP samples were evaluated using tensile and stress–relaxation tests to investigate the influence of nodular or spherulite morphologies. PP samples with different morphologies had almost the same crystallinity after annealing at 100°C for 5 h. The yielding stress, strain‐hardening modulus, and strength of the nodular PP were higher than those of the spherulite PP, although the crystallinity was almost the same for both PP samples. Furthermore, the relaxation time during the stress–relaxation process at ε = 4.0 was longer for the nodular PP than for the spherulite PP. The lamellar structure of a spherulite morphology comprises parent and daughter lamellar crystals, whereas that of a nodular morphology prepared via a mesophase structure comprises only parent lamellar crystals. The formation of the daughter lamellae reduces the number of tie chains. Therefore, the nodular PP has more tie chains than the spherulite PP. This transformation from a spherulite to a nodular morphology improved the mechanical properties of the PP. Highlights Influences of morphology on mechanical properties of polypropylene (PP). Tensile properties were higher for nodular PP than spherulite PP. Relaxation time of nodular PP was longer than spherulite PP. Nodular PP has more tie chains, resulting in improvements of tensile properties.
Zitieren
APA
Fukuda, Y., Kida, T., & Yamaguchi, M. (2023). Mechanical properties of isotactic polypropylene with nodular or spherulite morphologies. Polymer Engineering & Science, 63(12), 4043-4050. https://doi.org/10.1002/pen.26504
Vancouver
Fukuda Y, Kida T, Yamaguchi M. Mechanical properties of isotactic polypropylene with nodular or spherulite morphologies. Polymer Engineering & Science. 2023;63(12):4043-4050. doi:10.1002/pen.26504
BibTeX
@article{Fukuda2023,
author = {Fukuda, Yuta and Kida, Takumitsu and Yamaguchi, Masayuki},
title = {Mechanical properties of isotactic polypropylene with nodular or spherulite morphologies},
journal = {Polymer Engineering & Science},
year = {2023},
volume = {63},
number = {12},
pages = {4043--4050},
doi = {10.1002/pen.26504}
}
EUVIMED