EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Impact of carbamate formation on the surface tension of epoxy‐amine curing systems

Timothy M. Shenk, Kenneth M. Benjamin, Robb M. Winter

Polymer Engineering & Science · 2023-05 · 63 (5) · 1347-1358

DOI: 10.1002/pen.26288 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 24.04.2023. Verfasst von Timothy M. Shenk und 2 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 120 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Center for Integrated Nanotechnologies, South Dakota Space Grant Consortium, Sandia National Laboratories.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Epoxy‐amine reactive systems, including their surface tension, have been studied due to their use and importance in composites and adhesives in laboratory and industrial applications. Understanding how the system's surface tension changes during curing could help target applications for tailored composites. Using the Wilhelmy plate method, surface tensions for epoxy‐curing agent systems were investigated under different environments. While the epoxy exhibited an expected negative temperature coefficient of −0.096 mN/m/°C, the curing agent exhibited a positive temperature coefficient of 0.073 mN/m/°C, which is due to the curing agent reacting with atmospheric CO 2 to form carbamate through a zwitterion pathway and functional groups accumulating at the surface of the reacting systems. Carbamate formation results in a surface tension below that of the individual constituents in the epoxy‐amine curing agent system. Fourier transform infrared (FTIR) spectroscopy was used to verify in situ formation of carbamate, and by reducing the system's temperature, it was demonstrated that the system surface tension profiles displayed micellar surfactant‐like characteristics. FTIR was used to explore the difference in composition between the surface and the bulk, in particular carbamate formation at the surface, resulting in a lowering of the surface tension of reacting systems.

Förderung

  • Center for Integrated Nanotechnologies
  • South Dakota Space Grant Consortium
  • Sandia National Laboratories

Zitieren

APA

Shenk, T. M., Benjamin, K. M., & Winter, R. M. (2023). Impact of carbamate formation on the surface tension of epoxy‐amine curing systems. Polymer Engineering & Science, 63(5), 1347-1358. https://doi.org/10.1002/pen.26288

Vancouver

Shenk TM, Benjamin KM, Winter RM. Impact of carbamate formation on the surface tension of epoxy‐amine curing systems. Polymer Engineering & Science. 2023;63(5):1347-1358. doi:10.1002/pen.26288

BibTeX
@article{Shenk2023,
  author = {Shenk, Timothy M. and Benjamin, Kenneth M. and Winter, Robb M.},
  title = {Impact of carbamate formation on the surface tension of epoxy‐amine curing systems},
  journal = {Polymer Engineering & Science},
  year = {2023},
  volume = {63},
  number = {5},
  pages = {1347--1358},
  doi = {10.1002/pen.26288}
}
Kostenlos starten →