EUVIMEDEUVIMED entdecken
Crossref

Experimental and Numerical Analysis of Curing Deformation in Hybrid Composite T‐Stiffeners Considering Viscoelasticity of Materials

Yao Xiao, Zhiwei Lian, Weiwei Xu, Zhenyang Liu, Wenchen Zhao, Xu Wang, Peng Xu

Polymer Composites · 11.11.2026

DOI: 10.1002/pc.71820 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 11.11.2026. Verfasst von Yao Xiao und 6 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hybrid composites T‐shaped stiffeners fabricated from unidirectional tape and woven fabric prepregs are susceptible to curing deformation and residual stress redistribution during the curing and bonding process. However, existing models have limited capability to simultaneously capture viscoelastic behavior and multimaterial tool effects of T‐stiffeners. A multiscale homogenization method integrated with viscoelastic constitutive was established for both unidirectional tape and woven fabric composites, which the prediction error of axial modulus is 1% comparing with the average of experimental results. Furthermore, a sequentially coupled thermo‐chemical and mechanical model for deformation prediction during the curing and bonding process was further developed and validated against the experiment of T‐stiffeners. The model yields a maximum deviation of 10.5% in the overall deformation magnitude compared with the experimental measurements. Subsequently, the effect of tool configuration and stress relaxation of T‐stiffeners during the curing and bonding process was calculated with the validated FE model. It was found that different flexible tool configurations influence the magnitude and distribution of deformation through interfacial shear stress. Moreover, the numerical results based on the FE model found the stress relaxation during the bonding process drives an equilibrium transition of the internal stress generated in the curing process, decreasing the stress level from approximately 6.61 MPa to 4.27 MPa, which represents a reduction of about 35.4%. The findings demonstrate that viscoelasticity is necessary for capturing the key physics of dimensional stability in hybrid T‐stiffeners undergoing secondary thermal exposure.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Xiao, Y., Lian, Z., Xu, W., Liu, Z., Zhao, W., Wang, X., & Xu, P. (2026). Experimental and Numerical Analysis of Curing Deformation in Hybrid Composite T‐Stiffeners Considering Viscoelasticity of Materials. Polymer Composites. https://doi.org/10.1002/pc.71820

Vancouver

Xiao Y, Lian Z, Xu W, Liu Z, Zhao W, Wang X, et al. Experimental and Numerical Analysis of Curing Deformation in Hybrid Composite T‐Stiffeners Considering Viscoelasticity of Materials. Polymer Composites. 2026. doi:10.1002/pc.71820

BibTeX
@article{Xiao2026,
  author = {Xiao, Yao and Lian, Zhiwei and Xu, Weiwei and Liu, Zhenyang and Zhao, Wenchen and Wang, Xu and Xu, Peng},
  title = {Experimental and Numerical Analysis of Curing Deformation in Hybrid Composite T‐Stiffeners Considering Viscoelasticity of Materials},
  journal = {Polymer Composites},
  year = {2026},
  doi = {10.1002/pc.71820}
}
Kostenlos starten →