EUVIMEDEUVIMED entdecken
Crossref

Interphase Regulation and Electrothermal Performance of Functional Basalt Fiber/Carbon Nanotube/Epoxy Composites via Heat‐Source Location Control

Guoqian Xie, Dong Xiang, Lei Lin, Haibao Liu, Yixue Wang, Jinbo Cheng, Bin Wang, Chunxia Zhao, Hui Li, Yuanpeng Wu

Polymer Composites · 02.11.2026

DOI: 10.1002/pc.71814 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 02.11.2026. Verfasst von Guoqian Xie und 9 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Chengdu Municipal Science and Technology Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional thermal curing of fiber‐reinforced polymer composites relies on heating equipment, causing high energy consumption and slow heat transfer. The electrical insulation of basalt fiber (BF) limits the direct electrothermal curing. In this study, basalt fibers are modified with dopamine hydrochloride and coated with carbon nanotubes (CNTs) to create a functional film. Composite laminates were fabricated using oven curing and electrothermal curing with an embedded or two external functional layers. Polydopamine (PDA) modification improved CNT network stability and in‐plane temperature uniformity. Electrothermal curing reduced energy consumption by 97.1% versus oven curing. External functional film electrothermal cured laminates (R‐FPDA) attained flexural strength of 1239.03 MPa and modulus of 66.76 GPa, increasing by 37.5% and 46.6% respectively, against the unmodified oven‐cured laminate. Interphase measurements and simulations showed that the external double‐sided heat source produces more uniform through‐thickness temperature, enhanced resin flow and infiltration, thicker and more uniform interphases. In R‐FPDA, the BF/EP and BF‐PDA/CNT/EP interphase thicknesses reach 1471.08 and 1550.91 nm, growing by 119.50% and 102.04%, respectively, compared with O‐FPDA. Composites show potential for electrothermal deicing and thermal‐assisted heavy‐oil transport. This work offers an energy‐efficient route for manufacturing multifunctional basalt fiber composites, with potential applications in de‐icing, heavy‐oil transport, and other situations requiring lightweight, controllable heat generation.

Förderung

  • National Natural Science Foundation of China
  • Chengdu Municipal Science and Technology Program

Zitieren

APA

Xie, G., Xiang, D., Lin, L., Liu, H., Wang, Y., Cheng, J., Wang, B., Zhao, C., Li, H., & Wu, Y. (2026). Interphase Regulation and Electrothermal Performance of Functional Basalt Fiber/Carbon Nanotube/Epoxy Composites via Heat‐Source Location Control. Polymer Composites. https://doi.org/10.1002/pc.71814

Vancouver

Xie G, Xiang D, Lin L, Liu H, Wang Y, Cheng J, et al. Interphase Regulation and Electrothermal Performance of Functional Basalt Fiber/Carbon Nanotube/Epoxy Composites via Heat‐Source Location Control. Polymer Composites. 2026. doi:10.1002/pc.71814

BibTeX
@article{Xie2026,
  author = {Xie, Guoqian and Xiang, Dong and Lin, Lei and Liu, Haibao and Wang, Yixue and Cheng, Jinbo and Wang, Bin and Zhao, Chunxia and Li, Hui and Wu, Yuanpeng},
  title = {Interphase Regulation and Electrothermal Performance of Functional Basalt Fiber/Carbon Nanotube/Epoxy Composites via Heat‐Source Location Control},
  journal = {Polymer Composites},
  year = {2026},
  doi = {10.1002/pc.71814}
}
Kostenlos starten →