Plasma‐in‐Liquid Surface Modification of AlN Filler for Thermally Conductive Composites
Polymer Composites · 03.11.2026
DOI: 10.1002/pc.71793 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 03.11.2026. Verfasst von Rui Hasegawa und 8 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The recent trend of dense circuit integration in flexible electronic devices has intensified heat generation, making thermal management a critical issue. Consequently, there is a high demand for flexible and thermally conductive insulating materials. Composite elastomers with high‐thermal‐conductivity inorganic particle fillers, such as aluminum nitride (AlN), are promising materials. However, poor filler dispersion often reduces composite mechanical performance, making it difficult to simultaneously achieve high thermal conductivity and good mechanical properties. In this study, a plasma‐in‐liquid treatment was applied to AlN particles, and its influence on particle dispersion and composite properties was investigated. Fourier transform infrared spectroscopy and X‐ray diffraction analyses confirmed that the AlN particles retained their original chemical structure and crystallinity after plasma treatment. The plasma‐treated AlN showed improved dispersion in the polymer matrix and enhanced mechanical properties compared with untreated AlN. At a filler loading of 50 wt%, the composite exhibited a thermal conductivity of 0.5 W/mK, far exceeding the Maxwell‐model prediction, and a Young's modulus of 10 MPa, approaching the theoretical lower value for the composite. The composite material also exhibited a stress–strain response close to ideal rubber elasticity, consistent with the improved filler dispersion observed experimentally. These results demonstrate that composites containing plasma‐treated AlN can simultaneously exhibit improved particle dispersion, mechanical softness, and high thermal conductivity.
Zitieren
APA
Hasegawa, R., Yasuda, Y., Ito, T., Muneoka, H., Kirihara, K., Shimizu, Y., Hakuta, Y., Ito, K., & Terashima, K. (2026). Plasma‐in‐Liquid Surface Modification of AlN Filler for Thermally Conductive Composites. Polymer Composites. https://doi.org/10.1002/pc.71793
Vancouver
Hasegawa R, Yasuda Y, Ito T, Muneoka H, Kirihara K, Shimizu Y, et al. Plasma‐in‐Liquid Surface Modification of AlN Filler for Thermally Conductive Composites. Polymer Composites. 2026. doi:10.1002/pc.71793
BibTeX
@article{Hasegawa2026,
author = {Hasegawa, Rui and Yasuda, Yusuke and Ito, Tsuyohito and Muneoka, Hitoshi and Kirihara, Kazuhiro and Shimizu, Yoshiki and Hakuta, Yukiya and Ito, Kohzo and Terashima, Kazuo},
title = {Plasma‐in‐Liquid Surface Modification of AlN Filler for Thermally Conductive Composites},
journal = {Polymer Composites},
year = {2026},
doi = {10.1002/pc.71793}
}
EUVIMED