EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Numerical Assessment of Progressive Damage in CF / PEEK Laminates Under Monotonic and Progressive Cyclic Four‐Point Bending

Pedro Antônio Castro Regio dos Santos, Thais da Costa Dias, Geovanio Lima de Oliveira, Hugo Francisco Lisboa Santos, Winston C. Gama, Maikson L. P. Tonatto

Polymer Composites · 28.10.2026

DOI: 10.1002/pc.71781 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 28.10.2026. Verfasst von Pedro Antônio Castro Regio dos Santos und 5 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Petrobras, Conselho Nacional de Desenvolvimento Científico e Tecnológico.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon‐fiber‐reinforced PEEK composites combine high specific strength, corrosion resistance, and damage tolerance, supporting their use in aerospace, energy, and offshore applications. This work presents an integrated experimental, analytical, and numerical investigation of CF/PEEK thermoplastic laminates under quasi‐static and progressive cyclic four‐point bending, considering four stacking sequences: [0] 9 , [±35] 5 , [±55] 5 , and [90] 9 . Classical lamination theory was used to predict bending stiffness and first‐ply failure, while a Hashin‐based progressive damage model, calibrated through intralaminar fracture energies, was used to capture stiffness degradation, load redistribution, and final collapse under monotonic loading. Maximum Strain and Hashin first‐ply failure predictions were also assessed. The calibrated model reproduced the experimental peak loads with deviations up to 4.3% for the [0] 9 , [±55] 5 , and [90] 9 laminates, whereas the [±35] 5 layup was overpredicted by 32.8%, reflecting the non‐linear shear response of the PEEK matrix that is not captured by the linear‐elastic Hashin formulation. For the nominal antisymmetric angle‐ply sequences, torsion‐free and torsion‐restrained CLT predictions coincide; B coupling changes bending stiffness by less than 1%. Cyclic tests revealed marked stiffness degradation in matrix‐dominated [±35] 5 and [±55] 5 layups, in contrast to the brittle response of fiber and matrix‐aligned configurations. The calibration provides a common parameter set for the three layups governed by fiber or transverse matrix stresses; the shear‐dominated [±35] 5 response requires extended constitutive treatment.

Förderung

  • Petrobras
  • Conselho Nacional de Desenvolvimento Científico e Tecnológico

Zitieren

APA

Santos, P. A. C. R. D., Dias, T. D. C., Oliveira, G. L. D., Santos, H. F. L., Gama, W. C., & Tonatto, M. L. P. (2026). Experimental and Numerical Assessment of Progressive Damage in CF / PEEK Laminates Under Monotonic and Progressive Cyclic Four‐Point Bending. Polymer Composites. https://doi.org/10.1002/pc.71781

Vancouver

Santos PACRD, Dias TDC, Oliveira GLD, Santos HFL, Gama WC, Tonatto MLP. Experimental and Numerical Assessment of Progressive Damage in CF / PEEK Laminates Under Monotonic and Progressive Cyclic Four‐Point Bending. Polymer Composites. 2026. doi:10.1002/pc.71781

BibTeX
@article{Santos2026,
  author = {Santos, Pedro Antônio Castro Regio dos and Dias, Thais da Costa and Oliveira, Geovanio Lima de and Santos, Hugo Francisco Lisboa and Gama, Winston C. and Tonatto, Maikson L. P.},
  title = {Experimental and Numerical Assessment of Progressive Damage in CF / PEEK Laminates Under Monotonic and Progressive Cyclic Four‐Point Bending},
  journal = {Polymer Composites},
  year = {2026},
  doi = {10.1002/pc.71781}
}
Kostenlos starten →