Tensile and Flexural Properties of Carbon/Basalt Hybrid Fiber‐Reinforced Epoxy Composites Exposed to Salt‐Fog Condition
Polymer Composites · 20.11.2026 · 47 (22) · 20248-20266
DOI: 10.1002/pc.71600 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 08.09.2026. Verfasst von Silu Huang und 4 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation.
Abstract (Originalsprache)
This study investigated the short‐term salt‐fog response of carbon/basalt hybrid fiber reinforced epoxy composite laminates with different fiber volume fractions and carbon/basalt interface numbers. Tensile and three‐point bending tests, Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC) were used to evaluate the mechanical response and associated mechanisms. Fiber volume fraction significantly affected tensile strength, whereas the number of carbon/basalt interfaces showed no monotonic effect. Most laminates exhibited an increase in tensile strength during the first 6 h of exposure, after which tensile strength remained statistically stable, with changes within approximately ±6%. In contrast, flexural properties were more sensitive to stacking architecture and salt‐fog exposure. The laminate with 10 carbon/basalt interfaces exhibited the highest initial flexural strength and modulus, 421.60 MPa and 33.22 GPa, respectively, but also the largest reductions after 96 h of exposure, with strength and modulus decreasing by 32.10% and 17.17%. FTIR indicated moisture‐related changes in hydrogen‐bonding environments without extensive destruction of the epoxy backbone. DSC results demonstrated that short‐term salt‐fog behavior is governed by competing thermal‐conditioning and moisture‐related effects, while fiber volume fraction and through‐thickness stacking architecture control the tensile and flexural responses, respectively.
Förderung
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
Zitieren
APA
Huang, S., Osei‐Boffah, E., Chen, Y., Li, Z., & Zhang, Y. (2026). Tensile and Flexural Properties of Carbon/Basalt Hybrid Fiber‐Reinforced Epoxy Composites Exposed to Salt‐Fog Condition. Polymer Composites, 47(22), 20248-20266. https://doi.org/10.1002/pc.71600
Vancouver
Huang S, Osei‐Boffah E, Chen Y, Li Z, Zhang Y. Tensile and Flexural Properties of Carbon/Basalt Hybrid Fiber‐Reinforced Epoxy Composites Exposed to Salt‐Fog Condition. Polymer Composites. 2026;47(22):20248-20266. doi:10.1002/pc.71600
BibTeX
@article{Huang2026,
author = {Huang, Silu and Osei‐Boffah, Elvis and Chen, Yixiao and Li, Zhaoshuo and Zhang, Yantai},
title = {Tensile and Flexural Properties of Carbon/Basalt Hybrid Fiber‐Reinforced Epoxy Composites Exposed to Salt‐Fog Condition},
journal = {Polymer Composites},
year = {2026},
volume = {47},
number = {22},
pages = {20248--20266},
doi = {10.1002/pc.71600}
}
EUVIMED