Natural/Synthetic Hybrid Fiber‐Reinforced Polymer Composites: Advances in Interface Engineering, Hybridization Modeling, and Sustainable Manufacturing
Polymer Composites · 10.11.2026 · 47 (21) · 18961-18992
DOI: 10.1002/pc.71551 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 26.08.2026. Verfasst von Almas Anwar und 7 weiteren Autor:innen. Die Arbeit nennt 258 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Natural Science Foundation of Anhui Province.
Abstract (Originalsprache)
Hybrid natural/synthetic fiber‐reinforced polymer composites offer a practical engineering solution by combining the sustainability, low cost, and low density of natural fibers (1.3–1.5 g cm −3 ) with the strength, stiffness, and reliability of synthetic reinforcements like carbon (1.75–1.95 g cm −3 ), glass, or basalt fibers (2.5–2.8 g cm −3 ). This density difference enables strategic, material‐efficient synthetic placement only where structural demands require it. Reported tensile strengths range from 3 to 400 MPa for certain natural fiber systems to 60–784 MPa for specific glass/epoxy systems, highlighting the importance of reporting the fiber fraction, architecture, interface quality, and testing methods in the evaluation. However, weak fiber‐matrix adhesion, fiber variability, thermal instability, moisture sensitivity, and unpredictable multiscale hybrid effects hinder widespread structural use. To address these limits, this review evaluates advancements in composite design, processing, and performance. It focuses on hybrid architectures (interlayer, intralayer, intrayarn); interface engineering (physical, chemical, bio‐based, nanomaterials); predictive tools (analytical, semi‐empirical, data‐driven, digital twins, multiscale FEA); and manufacturing routes (conventional molding, resin transfer, automated fiber placement, additive manufacturing). Crucially, environmental and economic benefits are system‐dependent rather than inherent, requiring a complete accounting of fractions, matrices, treatments, energy, lifespan, and end‐of‐life pathways. By integrating interface design, manufacturing, and performance, this review clarifies the trade‐offs between sustainability and reliability, thereby establishing priorities for engineering scalable, lightweight, and durable hybrid composites.
Förderung
- National Key Research and Development Program of China
- Natural Science Foundation of Anhui Province
Zitieren
APA
Anwar, A., Ghaffar, S., Hassan, S. A., Chen, J., Zhang, L., Yang, H., Wang, P., & Wang, Z. (2026). Natural/Synthetic Hybrid Fiber‐Reinforced Polymer Composites: Advances in Interface Engineering, Hybridization Modeling, and Sustainable Manufacturing. Polymer Composites, 47(21), 18961-18992. https://doi.org/10.1002/pc.71551
Vancouver
Anwar A, Ghaffar S, Hassan SA, Chen J, Zhang L, Yang H, et al. Natural/Synthetic Hybrid Fiber‐Reinforced Polymer Composites: Advances in Interface Engineering, Hybridization Modeling, and Sustainable Manufacturing. Polymer Composites. 2026;47(21):18961-18992. doi:10.1002/pc.71551
BibTeX
@article{Anwar2026,
author = {Anwar, Almas and Ghaffar, Sidra and Hassan, Syed Aboubakar and Chen, Junjie and Zhang, Lele and Yang, Haiwei and Wang, Peng and Wang, Zongqian},
title = {Natural/Synthetic Hybrid Fiber‐Reinforced Polymer Composites: Advances in Interface Engineering, Hybridization Modeling, and Sustainable Manufacturing},
journal = {Polymer Composites},
year = {2026},
volume = {47},
number = {21},
pages = {18961--18992},
doi = {10.1002/pc.71551}
}
EUVIMED