Effect of Adhesive Filling on Tensile Performance of Hybrid Tooth‐Bolt Connections for Pultruded FRP Profiles
Polymer Composites · 10.09.2026 · 47 (17) · 15311-15324
DOI: 10.1002/pc.71288 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 15.06.2026. Verfasst von Shasha Liang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province, National Key Research and Development Program of China.
Abstract (Originalsprache)
Efficient load transfer remains a key challenge in hybrid tooth–bolt connections for fiber‐reinforced polymer (FRP) profiles. Here we propose a simple strengthening strategy based on adhesive filling of the bolt–hole clearance with a high‐performance epoxy resin. We tested joints with different tooth lengths, tooth depths and bolt preloads, both with and without adhesive filling. Adhesive filling markedly increased the ultimate load and pre‐peak energy absorption, while preserving the shear‐dominated final failure mode. It nevertheless changed the damage sequence. In joints without adhesive filling, the teeth carried most of the early‐stage load. Failure occurred abruptly when tooth‐root interlaminar shear triggered in‐plane shear damage around the outer bolt hole. With adhesive filling, the resin formed a continuous shear‐transfer path between the bolt and the hole wall. This promoted early bolt engagement, improved load redistribution and produced a more progressive response, including direct shear and crack‐then‐shear failure. Finite‐element simulations using zero‐thickness cohesive elements and the Hashin criterion captured the measured load–displacement responses and observed failure modes, thereby clarifying the strengthening mechanism. These findings show that adhesive filling provides a simple and effective route to improving the capacity and reliability of hybrid tooth–bolt connections for FRP profiles.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Jiangsu Province
- National Key Research and Development Program of China
Zitieren
APA
Liang, S., Zhu, R., Li, F., Tong, Z., & Li, D. (2026). Effect of Adhesive Filling on Tensile Performance of Hybrid Tooth‐Bolt Connections for Pultruded FRP Profiles. Polymer Composites, 47(17), 15311-15324. https://doi.org/10.1002/pc.71288
Vancouver
Liang S, Zhu R, Li F, Tong Z, Li D. Effect of Adhesive Filling on Tensile Performance of Hybrid Tooth‐Bolt Connections for Pultruded FRP Profiles. Polymer Composites. 2026;47(17):15311-15324. doi:10.1002/pc.71288
BibTeX
@article{Liang2026,
author = {Liang, Shasha and Zhu, Ruijie and Li, Feng and Tong, Zecheng and Li, Da},
title = {Effect of Adhesive Filling on Tensile Performance of Hybrid Tooth‐Bolt Connections for Pultruded FRP Profiles},
journal = {Polymer Composites},
year = {2026},
volume = {47},
number = {17},
pages = {15311--15324},
doi = {10.1002/pc.71288}
}
EUVIMED