EUVIMEDEUVIMED entdecken
Crossref

The Influence of Annealing on the Mechanical and Tribological Properties of FDM ‐Printed Carbon‐Fiber‐Reinforced Polyetheretherketone

Enxiang Song, Xu Li, Lijun Dang, Cong Ding, Ruize Fu, Yang Qiao

Polymer Composites · 10.08.2026 · 47 (15) · 13528-13540

DOI: 10.1002/pc.71169 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 17.05.2026. Verfasst von Enxiang Song und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 37 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyetheretherketone (PEEK) is an excellent material for human implants. The addition of carbon fibers (CFs) can further enhance the composite's mechanical properties. In this study, fused deposition modeling (FDM)‐printed CF/PEEK laminated specimens were heat‐treated. The effects of different heat‐treatment temperatures on the tensile, bending, and interlayer shear (ILSS) properties of FDM specimens were investigated. Meanwhile, friction and wear tests were conducted on PEEK and CF/PEEK materials before and after heat treatment, and the mechanism of the effect of heat treatment on their tribological properties was analyzed. It was found that higher heat‐treatment temperatures can effectively improve the crystallinity of the specimens, thereby significantly enhancing their mechanical properties and wear resistance. Observations of the surface morphology of the specimens revealed that as the heat treatment temperature increased, the depth of the wear pits decreased, and the frictional behavior of the surface material was optimized. Based on this, the friction and wear mechanism was discussed in this study, providing a process reference for subsequent related experiments and scientific research.

Zitieren

APA

Song, E., Li, X., Dang, L., Ding, C., Fu, R., & Qiao, Y. (2026). The Influence of Annealing on the Mechanical and Tribological Properties of FDM ‐Printed Carbon‐Fiber‐Reinforced Polyetheretherketone. Polymer Composites, 47(15), 13528-13540. https://doi.org/10.1002/pc.71169

Vancouver

Song E, Li X, Dang L, Ding C, Fu R, Qiao Y. The Influence of Annealing on the Mechanical and Tribological Properties of FDM ‐Printed Carbon‐Fiber‐Reinforced Polyetheretherketone. Polymer Composites. 2026;47(15):13528-13540. doi:10.1002/pc.71169

BibTeX
@article{Song2026,
  author = {Song, Enxiang and Li, Xu and Dang, Lijun and Ding, Cong and Fu, Ruize and Qiao, Yang},
  title = {The Influence of Annealing on the Mechanical and Tribological Properties of FDM ‐Printed Carbon‐Fiber‐Reinforced Polyetheretherketone},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {15},
  pages = {13528--13540},
  doi = {10.1002/pc.71169}
}
Kostenlos starten →