EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Glass Fibers Produced With Recovered Glass Fibers From Wind Turbine Blades—Recycling Value Chain and Properties of Glass Fibers and Composites

Justine Beauson, Asger Bech Abrahamsen, Irene Bach Velling Villadsen, Luc Peters, Bernard Kaesmacher, Agustin Canalis, Tom Løgstrup Andersen, Rajnish Kumar, Mariana Rojas, Jakob Eltzholtz

Polymer Composites · 10.12.2025 · 46 (17) · 15795-15810

DOI: 10.1002/pc.70006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 24.06.2025. Verfasst von Justine Beauson und 9 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovationsfonden.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recycling wind turbine blades poses significant challenges due to their composition. Blades are primarily made of fiber‐reinforced composites with a thermoset polymer, and about 60% of their mass consists of glass fibers. After recycling, recovered glass fibers typically exhibit poor properties, making them difficult to repurpose. This study explores the feasibility of remelting recovered glass fibers to produce new high‐performance glass fibers. Specifically, it investigates the potential of preparing a powder from recovered glass fibers and incorporating it into the production of new glass fibers. A large‐scale experiment was conducted, using glass fibers recovered from wind turbine blades at a concentration of 1.96 wt% to produce new high‐performance glass fibers. In total, 76 tons of glass fibers were produced, with properties comparable to those made from virgin materials. The study also examines the properties of composites manufactured with these new fibers and their potential application in new wind turbine blades. To date, no other studies have reported large‐scale experimental trials on remelting recovered glass fibers from end‐of‐life wind turbine blades to produce new glass fibers for manufacturing new wind turbine blades.

Förderung

  • Innovationsfonden

Zitieren

APA

Beauson, J., Abrahamsen, A. B., Villadsen, I. B. V., Peters, L., Kaesmacher, B., Canalis, A., Andersen, T. L., Kumar, R., Rojas, M., & Eltzholtz, J. (2025). Glass Fibers Produced With Recovered Glass Fibers From Wind Turbine Blades—Recycling Value Chain and Properties of Glass Fibers and Composites. Polymer Composites, 46(17), 15795-15810. https://doi.org/10.1002/pc.70006

Vancouver

Beauson J, Abrahamsen AB, Villadsen IBV, Peters L, Kaesmacher B, Canalis A, et al. Glass Fibers Produced With Recovered Glass Fibers From Wind Turbine Blades—Recycling Value Chain and Properties of Glass Fibers and Composites. Polymer Composites. 2025;46(17):15795-15810. doi:10.1002/pc.70006

BibTeX
@article{Beauson2025,
  author = {Beauson, Justine and Abrahamsen, Asger Bech and Villadsen, Irene Bach Velling and Peters, Luc and Kaesmacher, Bernard and Canalis, Agustin and Andersen, Tom Løgstrup and Kumar, Rajnish and Rojas, Mariana and Eltzholtz, Jakob},
  title = {Glass Fibers Produced With Recovered Glass Fibers From Wind Turbine Blades—Recycling Value Chain and Properties of Glass Fibers and Composites},
  journal = {Polymer Composites},
  year = {2025},
  volume = {46},
  number = {17},
  pages = {15795--15810},
  doi = {10.1002/pc.70006}
}
Kostenlos starten →