EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

In‐situ polymerizable thermoplastic and bio‐epoxy based composites for offshore renewable energy applications

Gursahib Singh Bhatia, Akshay Hejjaji, Jayaram R. Pothnis, Alexandre Portela, Anthony J. Comer

Polymer Composites · 20.10.2024 · 45 (15) · 13812-13828

DOI: 10.1002/pc.28737 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 10.07.2024. Verfasst von Gursahib Singh Bhatia und 4 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluates various quasi‐static mechanical properties of an in‐situ polymerizable thermoplastic and a bio‐based thermosetting composite comprising of non‐crimp fabric reinforcement for potential use in the next generation of Offshore Wind and Tidal Power platforms. Mechanical properties are characterized under tensile, flexural, in‐plane shear and interlaminar shear loading. Results reveal that the evaluated properties differ based upon matrix type. Fractographic evidence from scanning electron microscopy is used to explain the differences observed and was generally consistent in terms of revealing cohesive failure at the fiber‐matrix interface for the thermoplastic composite and contrasting adhesive failure for the thermosetting composite. For glass fiber reinforcement, the thermoplastic composite is superior in terms of flexural 90° properties (+20%) while the thermosetting composite performed better in flexure 0° in terms of both strength (+15%) and modulus (+25%). In terms of interlaminar shear, the thermosetting composite exhibited higher strength (+14%) while Tensile and in‐plane shear properties are similar for composites of both resin systems. Overall, neither composite is superior in terms of overall mechanical properties and both matrices show promise as a stepping stone towards the use of more sustainable constituents in offshore structures. Highlights Quasi‐static mechanical performance and failure analysis of relatively sustainable composites are presented. Failure analysis indicate cohesive failure of the thermoplastic based composite and interfacial failure of the thermosetting based composite. Proposed composites are benchmarked against the composites manufactured using conventional resins. Overall, both matrices show promise as a stepping stone towards more sustainable offshore structures.

Zitieren

APA

Bhatia, G. S., Hejjaji, A., Pothnis, J. R., Portela, A., & Comer, A. J. (2024). In‐situ polymerizable thermoplastic and bio‐epoxy based composites for offshore renewable energy applications. Polymer Composites, 45(15), 13812-13828. https://doi.org/10.1002/pc.28737

Vancouver

Bhatia GS, Hejjaji A, Pothnis JR, Portela A, Comer AJ. In‐situ polymerizable thermoplastic and bio‐epoxy based composites for offshore renewable energy applications. Polymer Composites. 2024;45(15):13812-13828. doi:10.1002/pc.28737

BibTeX
@article{Bhatia2024,
  author = {Bhatia, Gursahib Singh and Hejjaji, Akshay and Pothnis, Jayaram R. and Portela, Alexandre and Comer, Anthony J.},
  title = {In‐situ polymerizable thermoplastic and bio‐epoxy based composites for offshore renewable energy applications},
  journal = {Polymer Composites},
  year = {2024},
  volume = {45},
  number = {15},
  pages = {13812--13828},
  doi = {10.1002/pc.28737}
}
Kostenlos starten →