Preparation and characterization of halloysite nanotube‐silica/silicone rubber composites: Effect of HNTs on mechanical and thermal properties
Polymer Composites · 10.07.2024 · 45 (10) · 8759-8769
DOI: 10.1002/pc.28374 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 16.04.2024. Verfasst von Fanghui Wang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 49 Literaturangaben.
Abstract (Originalsprache)
A series of halloysite nanotube‐silica (HNTs‐SiO 2 ) nanocomposite fillers were prepared by in‐situ assembly, and a reinforced SiO 2 /SR composite was obtained by filling them into silicone rubber (SR). The morphology and structural characterization of HNTs‐SiO 2 and HNTs‐SiO 2 /SR and the properties of the HNTs‐SiO 2 /SR were studied. As a result, the small particle size SiO 2 was firmly anchored onto the HNTs surface, and the obtained HNTs‐SiO 2 nanofillers were uniformly dispersed in SR. At a 30 phr fixed filler loading, the weakest filler network and the best filler dispersion were obtained when HNTs content in HNTs‐SiO 2 was 5%. This resulted in a maximum tensile strength obtained of 6.2 MPa, 1.55 times that of SiO 2 /SR with the same filler loading, and a maximum elongation at break of 418%, 1.67 times that of the SiO 2 /SR with the same filler loading, and at the same time the tearing strength and hardness are also improved. Furthermore, the silicone rubber also showed improved thermal stability, with an initial degradation temperature increase of 30°C under a nitrogen atmosphere. Highlights HNTs–SiO 2 nanocomposites were successfully prepared by the self‐assembly method and used as fillers in SR as a new type of reinforcing material. The 1D HNTs act as a barrier to prevent SiO 2 aggregation and improved fillers dispersion. The elongation at break and tensile strength of 5% HNTs‐SiO 2 /SR are 67% and 55% higher than those of SiO 2 /SR, respectively. The silicone rubber also showed improved thermal stability.
Zitieren
APA
Wang, F., Shen, X., Wang, Q., & Zhu, H. (2024). Preparation and characterization of halloysite nanotube‐silica/silicone rubber composites: Effect of HNTs on mechanical and thermal properties. Polymer Composites, 45(10), 8759-8769. https://doi.org/10.1002/pc.28374
Vancouver
Wang F, Shen X, Wang Q, Zhu H. Preparation and characterization of halloysite nanotube‐silica/silicone rubber composites: Effect of HNTs on mechanical and thermal properties. Polymer Composites. 2024;45(10):8759-8769. doi:10.1002/pc.28374
BibTeX
@article{Wang2024,
author = {Wang, Fanghui and Shen, Xiaomei and Wang, Qingfu and Zhu, Hong},
title = {Preparation and characterization of halloysite nanotube‐silica/silicone rubber composites: Effect of HNTs on mechanical and thermal properties},
journal = {Polymer Composites},
year = {2024},
volume = {45},
number = {10},
pages = {8759--8769},
doi = {10.1002/pc.28374}
}
EUVIMED