EUVIMEDEUVIMED entdecken
Crossref

Effect of hybrid filler loading ( Polyalthia longifolia seed and graphite) on the mechanical and thermal properties of vinyl ester composites

Durairaj Manikandan, Veeramalai Chinnasamy Sathish Gandhi, Radhakrishnan Kumaravelan, Venkataraman Vignesh

Polymer Composites · 10.05.2024 · 45 (7) · 6318-6331

DOI: 10.1002/pc.28199 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 09.02.2024. Verfasst von Durairaj Manikandan und 3 weiteren Autor:innen. Die Arbeit wurde bisher 42-mal zitiert (Crossref) und nennt 45 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research paper focuses on the use of solid biomass waste, specifically a combination of Polyalthia longifolia seed (PLSF) and graphite (GH) powder, as reinforcements in vinyl ester (VE) composites. The composites were produced via the hand layup method, with the filler concentration varying from 0 to 15 wt% of PLSF and 0–9 wt% of graphite. The objective was to examine the influence of the hybrid filler on the mechanical characteristics of the composites. The mechanical properties of composites prepared from P. longifolia seeds and graphite powder were experimentally characterized. These properties included tensile strength, flexural strength, impact resistance, and hardness. The hybrid composite had a maximum tensile strength of 48.4 MPa, and its tensile modulus was 1.66 GPa. The hybrid filler at 15% wt% of PLSF and 6% of graphite has the highest flexural strength, which is around 148 MPa. The ultimate impact strength and hardness were measured to be 41.3 kJ/m 2 and 44.5, respectively, after the addition of 15 and 6 wt% of hybrid filler. In comparison to neat vinyl ester resin, the PLSF/GH‐VE composites exhibited an increase in tensile, flexural, impact, and hardness of 2.69, 1.82, 3.03, and 1.59 times, respectively. Hybrid composite surfaces were analyzed using scanning electron microscopes to determine surface characteristics and fractured surfaces. In addition, the PLSF/GH‐VE composites have been utilized in the production of components for four‐wheelers. Highlights Investigated the impact of hybrid filler‐reinforced vinyl ester composites. Mechanical and thermal properties were experimentally characterized. Surface characteristics and fractured surfaces were examined. PLSF / GH‐VE composites are used in producing components for four‐wheelers.

Zitieren

APA

Manikandan, D., Gandhi, V. C. S., Kumaravelan, R., & Vignesh, V. (2024). Effect of hybrid filler loading ( Polyalthia longifolia seed and graphite) on the mechanical and thermal properties of vinyl ester composites. Polymer Composites, 45(7), 6318-6331. https://doi.org/10.1002/pc.28199

Vancouver

Manikandan D, Gandhi VCS, Kumaravelan R, Vignesh V. Effect of hybrid filler loading ( Polyalthia longifolia seed and graphite) on the mechanical and thermal properties of vinyl ester composites. Polymer Composites. 2024;45(7):6318-6331. doi:10.1002/pc.28199

BibTeX
@article{Manikandan2024,
  author = {Manikandan, Durairaj and Gandhi, Veeramalai Chinnasamy Sathish and Kumaravelan, Radhakrishnan and Vignesh, Venkataraman},
  title = {Effect of hybrid filler loading ( Polyalthia longifolia seed and graphite) on the mechanical and thermal properties of vinyl ester composites},
  journal = {Polymer Composites},
  year = {2024},
  volume = {45},
  number = {7},
  pages = {6318--6331},
  doi = {10.1002/pc.28199}
}
Kostenlos starten →