EUVIMEDEUVIMED entdecken
Crossref

High‐dielectric PVDF / MXene composite dielectric materials for energy storage preparation and performance study

Shuo Meng, Tong Zhao, Xiaosong Wang, Xiaolong Wang, Yuantao Zhang

Polymer Composites · 10.03.2024 · 45 (4) · 3460-3473

DOI: 10.1002/pc.28002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 18.12.2023. Verfasst von Shuo Meng und 4 weiteren Autor:innen. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: Natural Science Foundation of Shandong Province, State Key Laboratory Of Alternate Electrical Power System With Renewable Energy Sources.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyvinylidene fluoride (PVDF) has broad application prospects in the field of dielectric capacitors. However, the low dielectric constant of the polymer greatly limits the improvement of its energy storage density. In this paper, a highly conductive two‐dimensional transition metal carbide (MXene) is utilized to modify PVDF by doping to prepare PVDF/MXene composite dielectrics, and a PVDF/MXene model is established based on molecular dynamics simulations to investigate the microscopic mechanism of improvement in the dielectric properties of the PVDF matrix upon doping. Finally, the effect of the MXene on the thermal conductivity and the mechanical and insulating properties of PVDF was investigated. The experimental results show that the relative dielectric constant of the PVDF/MXene‐1.0 wt% system at 100 Hz reached 14.54, which is 55.96% higher than that of pure PVDF, and this doping amount or lower can reduce the dielectric loss of PVDF. In addition, MXene doping improved the mechanical and thermal properties of the composite material to a certain degree. When the doping amount of MXene was lower than 1.0 wt%, the electric breakdown strength of the composite system was maintained above 245 MV/m, which is sufficient to achieve good insulation strength under most conditions. Highlights The low dielectric constant of polymers limits the improvement of their energy storage density. The doping of polymers with small amounts of conductive fillers can effectively increase the dielectric constant of the polymer matrix. A two‐dimensional nanomaterial MXene is used to improve the dielectric properties of PVDF matrix and the micromechanisms are analyzed by molecular dynamics simulations. The key properties of PVDF/MXene, such as the mechanical properties, thermal conductivity and insulation, are characterized.

Förderung

  • Natural Science Foundation of Shandong Province
  • State Key Laboratory Of Alternate Electrical Power System With Renewable Energy Sources

Zitieren

APA

Meng, S., Zhao, T., Wang, X., Wang, X., & Zhang, Y. (2024). High‐dielectric PVDF / MXene composite dielectric materials for energy storage preparation and performance study. Polymer Composites, 45(4), 3460-3473. https://doi.org/10.1002/pc.28002

Vancouver

Meng S, Zhao T, Wang X, Wang X, Zhang Y. High‐dielectric PVDF / MXene composite dielectric materials for energy storage preparation and performance study. Polymer Composites. 2024;45(4):3460-3473. doi:10.1002/pc.28002

BibTeX
@article{Meng2024,
  author = {Meng, Shuo and Zhao, Tong and Wang, Xiaosong and Wang, Xiaolong and Zhang, Yuantao},
  title = {High‐dielectric PVDF / MXene composite dielectric materials for energy storage preparation and performance study},
  journal = {Polymer Composites},
  year = {2024},
  volume = {45},
  number = {4},
  pages = {3460--3473},
  doi = {10.1002/pc.28002}
}
Kostenlos starten →