EUVIMEDEUVIMED entdecken
Crossref

Machine learning for bending behavior of sandwich beams with 3D ‐printed core and natural fiber‐reinforced composite face sheets

Saeed Kamarian, Amir Teimouri, Maysam Alinia, Saeed Saber‐Samandari, Jung‐il Song

Polymer Composites · 10.03.2024 · 45 (4) · 3043-3054

DOI: 10.1002/pc.27969 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 17.01.2024. Verfasst von Saeed Kamarian und 4 weiteren Autor:innen. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The primary objective of this study was to demonstrate the effectiveness of machine learning (ML) in predicting the mechanical behavior of sandwich structures. To achieve this, the study focused on assessing the bending response of environmentally friendly sandwich beams consisting of auxetic cores made from polylactic acid (PLA) and flax/epoxy composite face sheets reinforced with halloysite nanotubes (HNTs). Two ML techniques, specifically shallow neural networks (SNNs) and deep neural networks (DNNs), were employed to predict the specific energy absorption (SEA) and load‐deflection curves of these sandwich beams, respectively. The key design parameters under consideration included the HNT content in the face sheets and three geometric characteristics of the auxetic cells. Subsequently, 16 distinct specimens were meticulously designed for manufacturing, following Taguchi's experimental design principles. The cores of the structures were produced using 3D printing techniques, while the face sheets were meticulously fabricated using a hand layup process. These prepared specimens were then subjected to a three‐point bending test, and the collected data were employed to train the aforementioned neural networks. The outcomes of this study revealed that an SNN with a single hidden layer comprising seven neurons effectively predicted the SEA of the structures across various design parameter values. Additionally, the remarkable performance of a DNN, consisting of five hidden layers with 128, 64, 32, 16, and 8 units, respectively, was demonstrated by comparing its predicted results with the experimental results for a randomly designed sandwich beam. Highlights ML techniques were used for bending behavior of sandwich beams. The beams were made of flax/epoxy/HNT face sheets and 3D‐printed auxetic core. SNN was successfully employed to predict the SEA of the structures. DNN effectively predicted the load‐deflection curves. HNT content and auxetic cells significantly impacted the bending properties.

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Kamarian, S., Teimouri, A., Alinia, M., Saber‐Samandari, S., & Song, J. (2024). Machine learning for bending behavior of sandwich beams with 3D ‐printed core and natural fiber‐reinforced composite face sheets. Polymer Composites, 45(4), 3043-3054. https://doi.org/10.1002/pc.27969

Vancouver

Kamarian S, Teimouri A, Alinia M, Saber‐Samandari S, Song J. Machine learning for bending behavior of sandwich beams with 3D ‐printed core and natural fiber‐reinforced composite face sheets. Polymer Composites. 2024;45(4):3043-3054. doi:10.1002/pc.27969

BibTeX
@article{Kamarian2024,
  author = {Kamarian, Saeed and Teimouri, Amir and Alinia, Maysam and Saber‐Samandari, Saeed and Song, Jung‐il},
  title = {Machine learning for bending behavior of sandwich beams with 3D ‐printed core and natural fiber‐reinforced composite face sheets},
  journal = {Polymer Composites},
  year = {2024},
  volume = {45},
  number = {4},
  pages = {3043--3054},
  doi = {10.1002/pc.27969}
}
Kostenlos starten →