EUVIMEDEUVIMED entdecken
Crossref

Effect of fiber volume fraction on hybrid effects of tensile properties of unidirectional aramid/carbon fiber hybrid composites

Anni Wang, Yan Yang, Puxuan Zhang, Xiaogang Liu, Guowen Xu

Polymer Composites · 20.02.2024 · 45 (3) · 2050-2062

DOI: 10.1002/pc.27903 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 07.11.2023. Verfasst von Anni Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 32 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aramid/carbon fiber hybrid reinforced polymer (A/CHFRP) composites were prepared via compression molding to obtain carbon‐fiber‐reinforced polymer (CFRP) composites with better toughness. Based on the existing theoretical model, the effects of the carbon fiber volume fraction on the properties of the A/CHFRP were studied using thermal gravimetric analysis (TGA), tensile tests, and scanning electron microscopy (SEM) analysis. According to the TGA results, the hybrid fiber improved the thermal stability of the CFRP. With increasing carbon fiber content, the thermal stability of the A/CHFRP composites also increased. The tensile results showed that the A/CHFRP composite with a carbon fiber volume fraction of 22.7% exhibited “pseudo‐ductility,” with the failure strain 54.09% higher than that of the CFRP composite. With increasing carbon fiber content, the ductility of the A/CHFRP composites decreased. The elastic modulus of the A/CHFRP composites conformed to the prediction model of the rule of mixtures (ROM). The strength was found to fall in the triangular area surrounded by the ROM and the bilinear ROM and exhibited a positive hybrid effect. The SEM results showed that the tensile failure modes of the A/CHFRP composites were mainly fiber and resin matrix debonding and fiber fracture. Brittle fracture of the carbon fibers was observed in the A/CHFRP composites, while aramid fibers appeared to peel off and silk crimp for ductile failure. Thus, this study provides a theoretical basis for toughening CFRPs. Highlights The volume ratio of the two fibers affects the hybrid effect of A/CHFRP. The thermal stability of A/CHFRP increases with increasing carbon fiber content. The carbon fiber volume ratio of 22.7% in A/CHFRP exhibited pseudo‐ductility. A/CHFRP exhibiting a failure strain 54.09% higher than that of the CFRP. The strength prediction of A/CHFRP depends on the failure mode.

Förderung

  • China Postdoctoral Science Foundation
  • National Key Research and Development Program of China

Zitieren

APA

Wang, A., Yang, Y., Zhang, P., Liu, X., & Xu, G. (2024). Effect of fiber volume fraction on hybrid effects of tensile properties of unidirectional aramid/carbon fiber hybrid composites. Polymer Composites, 45(3), 2050-2062. https://doi.org/10.1002/pc.27903

Vancouver

Wang A, Yang Y, Zhang P, Liu X, Xu G. Effect of fiber volume fraction on hybrid effects of tensile properties of unidirectional aramid/carbon fiber hybrid composites. Polymer Composites. 2024;45(3):2050-2062. doi:10.1002/pc.27903

BibTeX
@article{Wang2024,
  author = {Wang, Anni and Yang, Yan and Zhang, Puxuan and Liu, Xiaogang and Xu, Guowen},
  title = {Effect of fiber volume fraction on hybrid effects of tensile properties of unidirectional aramid/carbon fiber hybrid composites},
  journal = {Polymer Composites},
  year = {2024},
  volume = {45},
  number = {3},
  pages = {2050--2062},
  doi = {10.1002/pc.27903}
}
Kostenlos starten →