EUVIMEDEUVIMED entdecken
Crossref

A Novel Additively Manufactured Porous Metamaterial for Lightweight and High‐Strength Structural Battery Casings in Power System Energy Storage Applications

Li Xun, Xie Peng, Liu Mingjun, Ge Jing, Mostafa Habibi

Polymers for Advanced Technologies · 2026-11 · 37 (11)

DOI: 10.1002/pat.70790 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers for Advanced Technologies, online erschienen am 09.11.2026. Verfasst von Li Xun und 4 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a novel additively manufactured metamaterial based on a Triply Periodic Minimal Surface (TPMS) unit‐cell architecture, designed to achieve exceptional mechanical strength under compressive loading. A comprehensive parametric study was conducted using 9 series of finite element simulations, systematically varying the number of unit‐cells per circle (4, 7, and 10) and the unit‐cell height (14.7, 24.5, and 34.3 mm). Experimental validation via DLP additive manufacturing and compression testing of a representative specimen demonstrated excellent model reliability, with an R 2 value of 0.997 and a maximum force prediction error of only 1.35%. The results reveal that increasing the number of unit‐cells per circle dramatically enhances load‐bearing capacity, with the optimal configuration (7 cells per circle, 14.7 mm height) achieving a remarkable maximum force of 4998.7 N, representing a 124% increase over the 4‐cell counterpart. Concurrently, the highest instability displacement of 1.93 mm was recorded for the 4‐cell, 14.7 mm height structure, highlighting a trade‐off between strength and deformation stability. Strain distribution analysis shows that plastic deformation concentrates around unit‐cell voids, with lower cell heights promoting interconnected plastic networks and superior energy absorption. The proposed metamaterial demonstrates exceptional strength‐to‐weight performance, positioning it as a promising candidate for lightweight structural applications.

Zitieren

APA

Xun, L., Peng, X., Mingjun, L., Jing, G., & Habibi, M. (2026). A Novel Additively Manufactured Porous Metamaterial for Lightweight and High‐Strength Structural Battery Casings in Power System Energy Storage Applications. Polymers for Advanced Technologies, 37(11). https://doi.org/10.1002/pat.70790

Vancouver

Xun L, Peng X, Mingjun L, Jing G, Habibi M. A Novel Additively Manufactured Porous Metamaterial for Lightweight and High‐Strength Structural Battery Casings in Power System Energy Storage Applications. Polymers for Advanced Technologies. 2026;37(11). doi:10.1002/pat.70790

BibTeX
@article{Xun2026,
  author = {Xun, Li and Peng, Xie and Mingjun, Liu and Jing, Ge and Habibi, Mostafa},
  title = {A Novel Additively Manufactured Porous Metamaterial for Lightweight and High‐Strength Structural Battery Casings in Power System Energy Storage Applications},
  journal = {Polymers for Advanced Technologies},
  year = {2026},
  volume = {37},
  number = {11},
  doi = {10.1002/pat.70790}
}
Kostenlos starten →