EUVIMEDEUVIMED entdecken
Crossref

Mitigating UV ‐Triggered Degradation and Yellowing in White Architectural Paints Based on Styrene‐Acrylic Emulsion Polymer Matrices Through Covalent Incorporation of a Polymerizable Organic UV Absorber Moiety

Paresh M. Patil, Bhavesh M. Patil, Roshan P. Rane, Satyavan P. Varande, Vasant M. Patil, Sunil N. Peshane, Vishwanath R. Patil

Polymers for Advanced Technologies · 2026-07 · 37 (7)

DOI: 10.1002/pat.70674 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers for Advanced Technologies, online erschienen am 14.07.2026. Verfasst von Paresh M. Patil und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 37 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Styrene‐acrylic waterborne emulsions are widely adopted for architectural coatings owing to their favorable cost‐performance balance and low volatile organic compound (VOC) emissions. However, their long‐term exterior durability is fundamentally limited by UV‐induced photo‐oxidation and yellowing of the styrenic segments. Conventional mitigation strategies employing physically blended benzotriazole (BTZ) UV absorbers suffer from poor polymer additive compatibility, absorber migration, and progressive loss of UV‐shielding efficacy. In this work, we report the rational design and covalent incorporation of a polymerizable benzotriazole derivative (P‐BTZ) into the styrene‐acrylic polymer backbone via semi‐batch emulsion polymerization. P‐BTZ was synthesized through a two‐step sequence: regioselective bromination of 2‐(2‐hydroxy‐5‐methylphenyl)benzotriazole followed by palladium‐catalyzed Suzuki coupling with 4‐vinylphenylboronic acid. The resulting benzotriazole‐modified styrene‐acrylic emulsion polymer (BMSAEP) was comprehensively characterized by 1 H and 13 C NMR spectroscopy, dynamic light scattering (DLS), zeta potential analysis, UV–Vis spectroscopy, FTIR spectroscopy, powder X‐ray diffraction (XRD), thermogravimetric analysis (TGA), atomic force microscopy (AFM), contact angle measurement, and scanning electron microscopy (SEM). White exterior paints formulated using three binder systems—a conventional styrene–acrylic emulsion (control), a binder with physically blended BTZ, and the BMSAEP—were subjected to accelerated UV weathering (200 h, ASTM G154). The BMSAEP‐based coating exhibited markedly superior color retention (ΔE* = 0.79) relative to the blended‐BTZ (ΔE* = 2.27) and unprotected control (ΔE* = 3.25) formulations. UV–Vis spectroscopy confirmed dual absorption maxima at 320 and 350 nm, demonstrating enhanced UV‐A shielding. TGA indicated improved thermal stability with a maximum degradation temperature of ~405°C. The superior performance is attributed to the permanent immobilization of UV‐absorbing chromophores within the polymer network, enabling efficient excited‐state intramolecular proton transfer (ESIPT) energy dissipation while preventing migratory losses. These findings establish a structure–property framework for covalently engineered UV‐stabilized waterborne coatings with prolonged service life for exterior architectural applications.

Zitieren

APA

Patil, P. M., Patil, B. M., Rane, R. P., Varande, S. P., Patil, V. M., Peshane, S. N., & Patil, V. R. (2026). Mitigating UV ‐Triggered Degradation and Yellowing in White Architectural Paints Based on Styrene‐Acrylic Emulsion Polymer Matrices Through Covalent Incorporation of a Polymerizable Organic UV Absorber Moiety. Polymers for Advanced Technologies, 37(7). https://doi.org/10.1002/pat.70674

Vancouver

Patil PM, Patil BM, Rane RP, Varande SP, Patil VM, Peshane SN, et al. Mitigating UV ‐Triggered Degradation and Yellowing in White Architectural Paints Based on Styrene‐Acrylic Emulsion Polymer Matrices Through Covalent Incorporation of a Polymerizable Organic UV Absorber Moiety. Polymers for Advanced Technologies. 2026;37(7). doi:10.1002/pat.70674

BibTeX
@article{Patil2026,
  author = {Patil, Paresh M. and Patil, Bhavesh M. and Rane, Roshan P. and Varande, Satyavan P. and Patil, Vasant M. and Peshane, Sunil N. and Patil, Vishwanath R.},
  title = {Mitigating UV ‐Triggered Degradation and Yellowing in White Architectural Paints Based on Styrene‐Acrylic Emulsion Polymer Matrices Through Covalent Incorporation of a Polymerizable Organic UV Absorber Moiety},
  journal = {Polymers for Advanced Technologies},
  year = {2026},
  volume = {37},
  number = {7},
  doi = {10.1002/pat.70674}
}
Kostenlos starten →