CNF Effects in CFRP Under HCl / NaOH : Drilling Parameters, Delamination Maps, and Mechanical Performance
Polymers for Advanced Technologies · 2026-07 · 37 (7)
DOI: 10.1002/pat.70667 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers for Advanced Technologies, online erschienen am 15.07.2026. Verfasst von Ahmet Can Gungor und 2 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this study, the tensile, three‐point bending, and drilling behaviors of carbon/epoxy (CFRP) and CNF‐reinforced carbon/epoxy composites were compared after exposure to HCl (acidic) and NaOH (basic) environments. Drilling used a 5 mm TiN‐coated carbide drill at 2500–3500 rpm and 110–550 mm/min. Exit‐side damage was quantified by delamination factor ( F d ) and corrected delamination factor ( F da ) via microscopy and image processing. Environmental conditioning clearly affected both mechanical load‐carrying capacity and machinability within the tested conditions. NaOH caused the most severe degradation, while HCl had a more limited effect. In CFRP, tensile load dropped by ~7.3% (HCl) and ~14.3% (NaOH); CNF reduced these losses by ~5.7% and ~10.5%, respectively. During drilling, the lowest F d / F da occurred at 3500 rpm–110 mm/min, and the highest at 2500 rpm–550 mm/min. Under the critical NaOH condition (550 mm/min–2500 rpm), F da decreased from 1.126 (CFRP) to 1.054 (CNF/CFRP), an absolute improvement of ~6%–7%. These gains reflect barrier/tortuosity and crack deflection/bridging mechanisms, and shift delamination to a more stable, less parameter‐sensitive regime. The results provide practical, environment‐specific process windows linking corrosion, microstructure, and drilling response.
Zitieren
APA
Gungor, A. C., Arikan, H., & Demirci, I. (2026). CNF Effects in CFRP Under HCl / NaOH : Drilling Parameters, Delamination Maps, and Mechanical Performance. Polymers for Advanced Technologies, 37(7). https://doi.org/10.1002/pat.70667
Vancouver
Gungor AC, Arikan H, Demirci I. CNF Effects in CFRP Under HCl / NaOH : Drilling Parameters, Delamination Maps, and Mechanical Performance. Polymers for Advanced Technologies. 2026;37(7). doi:10.1002/pat.70667
BibTeX
@article{Gungor2026,
author = {Gungor, Ahmet Can and Arikan, Huseyin and Demirci, Ibrahim},
title = {CNF Effects in CFRP Under HCl / NaOH : Drilling Parameters, Delamination Maps, and Mechanical Performance},
journal = {Polymers for Advanced Technologies},
year = {2026},
volume = {37},
number = {7},
doi = {10.1002/pat.70667}
}
EUVIMED