EUVIMEDEUVIMED entdecken
Crossref

Development of Multiscale E‐Glass Fiber/Epoxy Composite Containing NiO @Graphene Oxide Nanohybrid: Mechanical Property Evaluation

Fariba Mohseni, Hamed Khosravi, Alireza Rezvani, Esmaeil Tohidlou

Polymers for Advanced Technologies · 2026-04 · 37 (4)

DOI: 10.1002/pat.70551 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers for Advanced Technologies, online erschienen am 31.03.2026. Verfasst von Fariba Mohseni und 3 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Gefördert von: University of Sistan and Baluchestan, University of Tehran.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work was carried out to assess the influence of NiO‐decorated graphene oxide (NiO@GO) on both the flexural response and dry‐sliding characteristics of E‐glass fiber/epoxy (GF/EP) composite. Initially, the surface of GO was decorated with NiO nanoparticles, and the successful synthesis of NiO@GO nanohybrids was later verified using a range of characterization routes, including X‐ray diffraction (XRD), atomic‐force microscopy (AFM), energy dispersive X‐ray spectroscopy (EDS), and X‐ray mapping. In the subsequent stage, multiscale GF/EP composites were prepared by adding various loadings of the NiO@GO nanohybrids to the matrix (0.05, 0.1, 0.3, 0.5, and 0.7 wt.%). These composites were then examined through three‐point bending and dry‐sliding wear tests. According to the results, the best flexural properties were achieved in the specimens with 0.1 wt.% NiO@GO, whereas the most favorable wear resistance appeared in those having 0.3 wt.%. By adding 0.1 wt.% of the NiO@GO nanohybrid, the flexural strength and flexural modulus of the specimen were increased by 38.8% and 19.9%, respectively, compared to the NiO@GO‐free control composite. Besides, incorporating 0.3 wt.% of the NiO@GO led to reductions of 55.2% in wear rate and a 30.3% in the friction coefficient with respect to the neat GF/EP specimen. The results of this study also confirmed the superiority of the NiO@GO nanohybrids over pristine GO for improving the mechanical performance of the GF/EP composites. Field‐emission scanning electron microscopy (FESEM) images verified that the observed improvements were primarily as a result of the improved bonding between the GF and matrix when NiO@GO nanohybrids are present.

Förderung

  • University of Sistan and Baluchestan
  • University of Tehran

Zitieren

APA

Mohseni, F., Khosravi, H., Rezvani, A., & Tohidlou, E. (2026). Development of Multiscale E‐Glass Fiber/Epoxy Composite Containing NiO @Graphene Oxide Nanohybrid: Mechanical Property Evaluation. Polymers for Advanced Technologies, 37(4). https://doi.org/10.1002/pat.70551

Vancouver

Mohseni F, Khosravi H, Rezvani A, Tohidlou E. Development of Multiscale E‐Glass Fiber/Epoxy Composite Containing NiO @Graphene Oxide Nanohybrid: Mechanical Property Evaluation. Polymers for Advanced Technologies. 2026;37(4). doi:10.1002/pat.70551

BibTeX
@article{Mohseni2026,
  author = {Mohseni, Fariba and Khosravi, Hamed and Rezvani, Alireza and Tohidlou, Esmaeil},
  title = {Development of Multiscale E‐Glass Fiber/Epoxy Composite Containing NiO @Graphene Oxide Nanohybrid: Mechanical Property Evaluation},
  journal = {Polymers for Advanced Technologies},
  year = {2026},
  volume = {37},
  number = {4},
  doi = {10.1002/pat.70551}
}
Kostenlos starten →