EUVIMEDEUVIMED entdecken
Crossref

Preparation and Conductivity Analysis of LLTO Nanofiber‐Incorporated PEO ‐ PVDF ‐ HFP ‐ LiClO 4 Solid Polymer Electrolytes for High‐Voltage Lithium Metal Batteries

Mariappan Ganeshbabu, Ramakrishnan Kalai Selvan

Polymers for Advanced Technologies · 2024-10 · 35 (10)

DOI: 10.1002/pat.6603 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers for Advanced Technologies, online erschienen am 15.10.2024. Verfasst von Mariappan Ganeshbabu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 70 Literaturangaben. Gefördert von: Tamil Nadu State Council for Higher Education.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work focuses on the development of a composite polymer electrolyte (CPE) for all‐solid‐state lithium metal batteries (ASSLMBs), integrating LLTO nanofibers into a PEO (polyethylene oxide)‐PVDF‐HFP (poly(vinylidene fluoride‐cohexafluoropropylene)) matrix with LiClO 4 as the lithium salt. The PEO has high ionic conductivity and flexibility, and the PVDF‐HFP has high mechanical strength and electrochemical stability. Therefore, the resulting composite has improved electrochemical performance and mechanical properties. Incorporating LLTO nanofibers enhances ionic conductivity due to the one‐dimensional ion transport pathways provided by the nanofibers while maintaining mechanical integrity and air stability, overcoming the challenges associated with conventional fillers. The prepared CPE demonstrates exceptional electrochemical stability up to 5.1 V versus Li/Li + , making it suitable for high‐voltage applications over traditional polymer electrolytes. The optimized CPE with 15 wt% LLTO provides the ionic conductivity of 1.1 × 10 −5 S cm −1 at room temperature and reaches 1.46 × 10 −4 S cm −1 at 80°C. The assembled LiNi 1/3 Mn 1/3 Co 1/3 PO 4 ||PEO‐PVDF‐HFP‐LiClO₄‐LLTO||Li based 2032 coin cell worked in between 3 and 4.8 V versus Li/Li + potential window without any electrolyte decomposition from 0.5 to 5 mV/s scan rates. Similarly, the fabricated LiFePO₄||PEO‐PVDF‐HFP (1:2)‐LiClO 4 ‐LLTO (15 wt%)||Li cell provides an initial capacity of 149 mAh g −1 at 0.1 C and 85 mAh g −1 at 0.5 C, exploring its potential for lithium metal batteries. Overall, this work offers a promising pathway for developing advanced solid polymer electrolytes for next‐generation lithium metal batteries, which combine high ionic conductivity, excellent electrochemical performances, and robust mechanical properties.

Förderung

  • Tamil Nadu State Council for Higher Education

Zitieren

APA

Ganeshbabu, M., & Selvan, R. K. (2024). Preparation and Conductivity Analysis of LLTO Nanofiber‐Incorporated PEO ‐ PVDF ‐ HFP ‐ LiClO 4 Solid Polymer Electrolytes for High‐Voltage Lithium Metal Batteries. Polymers for Advanced Technologies, 35(10). https://doi.org/10.1002/pat.6603

Vancouver

Ganeshbabu M, Selvan RK. Preparation and Conductivity Analysis of LLTO Nanofiber‐Incorporated PEO ‐ PVDF ‐ HFP ‐ LiClO 4 Solid Polymer Electrolytes for High‐Voltage Lithium Metal Batteries. Polymers for Advanced Technologies. 2024;35(10). doi:10.1002/pat.6603

BibTeX
@article{Ganeshbabu2024,
  author = {Ganeshbabu, Mariappan and Selvan, Ramakrishnan Kalai},
  title = {Preparation and Conductivity Analysis of LLTO Nanofiber‐Incorporated PEO ‐ PVDF ‐ HFP ‐ LiClO 4 Solid Polymer Electrolytes for High‐Voltage Lithium Metal Batteries},
  journal = {Polymers for Advanced Technologies},
  year = {2024},
  volume = {35},
  number = {10},
  doi = {10.1002/pat.6603}
}
Kostenlos starten →