Protective Coating From PVP Resin Precursor: A Low‐Cost Approach to Tackling Challenges of Aluminum‐Based Anode Material for Lithium‐Ion Batteries
ChemistryOpen · 2026-07 · 15 (7)
DOI: 10.1002/open.202500487 ↗Kurz gefasst
Fachartikel in der Zeitschrift ChemistryOpen, online erschienen am 15.07.2026. Verfasst von Kien Trung Pham und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Research Development, Institute of Materials, Biology and Environment, Ha Noi, Viet Nam. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Aluminum is a promising anode material for lithium‐ion batteries (LIBs) due to its high theoretical capacity, low cost, and natural abundance. However, severe volume changes during cycling lead to rapid structural degradation and poor performance. In this work, a simple and scalable surface modification strategy is proposed to enhance the electrochemical performance of aluminum anodes. Commercial aluminum powder was uniformly coated with polyvinylpyrrolidone and subsequently carbonized to form a continuous amorphous carbon shell. Structural and morphological analyses confirmed complete carbon coverage on the aluminum particles. Electrochemical measurements demonstrated that the carbon‐coated aluminum anode delivered a specific capacity ≈150% higher than that of pristine aluminum and exhibited markedly improved cycling stability. The carbon layer effectively mitigated volume‐induced degradation and enabled a progressive lithiation behavior from the particle surface toward the core. Electrochemical impedance spectroscopy further revealed reduced charge–transfer resistance and more stable solid electrolyte interphase formation over repeated cycles. These results indicate that carbon‐coated aluminum is a viable and scalable anode material, offering enhanced capacity retention and durability for next‐generation LIBs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Research Development, Institute of Materials, Biology and Environment, Ha Noi, Viet Nam.
- Laboratory of Advanced Materials and Natural Resources, Institute for Advanced Study in Technology, Ton Duc Thang University, Ho Chi Minh City, Viet Nam.
- Faculty of Applied Sciences, Ton Duc Thang University, Ho Chi Minh City, Viet Nam.
- Department of Advanced Materials Science and Nanotechnology, University of Science and Technology of Hanoi, Ha Noi, Viet Nam.
- Center for Advanced Chemistry, Institute of Research and Development, Duy Tan University, Da Nang, Vietnam.
- Faculty of Natural Sciences, Duy Tan University, Da Nang, Vietnam.
ORCID-Profile: Duong Duc La, Dinh Duc Nguyen
Zitieren
APA
Pham, K. T., Nguyen, H. T., Le, T. C. U., Vu, T. T., Le, T. H., Nguyen, H. T., La, D. D., Nguyen, D. K., & Nguyen, D. D. (2026). Protective Coating From PVP Resin Precursor: A Low‐Cost Approach to Tackling Challenges of Aluminum‐Based Anode Material for Lithium‐Ion Batteries. ChemistryOpen, 15(7). https://doi.org/10.1002/open.202500487
Vancouver
Pham KT, Nguyen HT, Le TCU, Vu TT, Le TH, Nguyen HT, et al. Protective Coating From PVP Resin Precursor: A Low‐Cost Approach to Tackling Challenges of Aluminum‐Based Anode Material for Lithium‐Ion Batteries. ChemistryOpen. 2026;15(7). doi:10.1002/open.202500487
BibTeX
@article{Pham2026,
author = {Pham, Kien Trung and Nguyen, Huyen Thi and Le, Thu Chau Uyen and Vu, Thien Tri and Le, Thanh Huu and Nguyen, Hung Tran and La, Duong Duc and Nguyen, Duy Khiem and Nguyen, Dinh Duc},
title = {Protective Coating From PVP Resin Precursor: A Low‐Cost Approach to Tackling Challenges of Aluminum‐Based Anode Material for Lithium‐Ion Batteries},
journal = {ChemistryOpen},
year = {2026},
volume = {15},
number = {7},
doi = {10.1002/open.202500487}
}
EUVIMED