EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mercury (II) Removal From Stock Solutions Using Pulsed Electrochemical Technique Coupled With Biochar Adsorbent

Werkne Sorsa Muleta, Lelisa Regea Mengistu, Madhappan Santhamoorthy, Perumal Asaithambi iD

ChemistryOpen · 2026-05 · 15 (5)

DOI: 10.1002/open.202500395 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemistryOpen, online erschienen am 07.05.2026. Verfasst von Werkne Sorsa Muleta und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering, Jimma Institute of Technology, Jimma University, Jimma, Ethiopia. Hauptthemen laut MEDLINE: Mercury, Charcoal, Water Pollutants, Chemical, Electrochemical Techniques. Die Arbeit nennt 83 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mercury (Hg) in water bodies is a major environmental concern due to its high toxicity and bioaccumulation in the food chain. Conventional treatment methods have limited effectiveness in removing mercury. This study explores a combined approach involving pulsed electrooxidation (PEO) and biochar adsorption for enhanced Hg removal from synthetic water. Biochar, produced from agricultural waste, was optimized for efficient oxidation. Batch adsorption experiments evaluated the performance of the biochar adsorbent, analyzing factors such as dosage, contact time, and initial Hg concentration. The integration of PEO and biochar adsorption resulted in a synergistic enhancement of Hg removal from synthetic water. For maximum Hg removal effectiveness, the PEO approach was applied, using electrode spacings of 0.5 and 1 cm. The process's conductivity was increased by adding sodium chloride. The results indicated optimal removal efficiencies of 97.37% and 96.24% with PEO alone and 98.92% and 97.899% when PEO was combined with magnetic biochar for 0.5 cm and 1 cm electrode spacing, respectively. At pH of 6.03, 34.15 of minutes of reaction time, 1.55 g/L of magnetic biochar, 0.43 amps of current, 0.45 Kwh/m 3 , electric energy consumed, and 227 mg/L of mercury concentration, these results were collected. According to the results, mercury (II) be effectively removed from aqueous solutions by using a combination of PEO and biochar adsorption.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

MercuryCharcoalWater Pollutants, ChemicalElectrochemical TechniquesAdsorptionOxidation-ReductionWater PurificationElectrodesHydrogen-Ion Concentration

Stichwörter der Autor:innen

biochar adsorbentenvironmental sustainabilityheavy metalpulsed electro‐oxidationwastewater treatment

Substanzen

MercuryCharcoalbiocharWater Pollutants, Chemical

Autor:innen und Institutionen

  • School of Chemical Engineering, Jimma Institute of Technology, Jimma University, Jimma, Ethiopia.
  • Faculty of Civil and Environmental Engineering, Jimma Institute of Technology, Jimma University, Jimma, Ethiopia.
  • School of Chemical Engineering, Yeungnam University, Gyeongsan, Republic of Korea.
  • Department of Biotechnology and Chemical Engineering, School of Engineering, Faculty of Science, Technology and Architure, Manipal University Jaipur, Jaipur, India.

ORCID-Profile: Perumal Asaithambi

Zitieren

APA

Muleta, W. S., Mengistu, L. R., Santhamoorthy, M., & Asaithambi, P. (2026). Mercury (II) Removal From Stock Solutions Using Pulsed Electrochemical Technique Coupled With Biochar Adsorbent. ChemistryOpen, 15(5). https://doi.org/10.1002/open.202500395

Vancouver

Muleta WS, Mengistu LR, Santhamoorthy M, Asaithambi P. Mercury (II) Removal From Stock Solutions Using Pulsed Electrochemical Technique Coupled With Biochar Adsorbent. ChemistryOpen. 2026;15(5). doi:10.1002/open.202500395

BibTeX
@article{Muleta2026,
  author = {Muleta, Werkne Sorsa and Mengistu, Lelisa Regea and Santhamoorthy, Madhappan and Asaithambi, Perumal},
  title = {Mercury (II) Removal From Stock Solutions Using Pulsed Electrochemical Technique Coupled With Biochar Adsorbent},
  journal = {ChemistryOpen},
  year = {2026},
  volume = {15},
  number = {5},
  doi = {10.1002/open.202500395}
}
Kostenlos starten →