EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

On the implementation of a material point‐based arc‐length method

Nathan D. Gavin, Giuliano Pretti, William M. Coombs, John C. Brigham, Charles E. Augarde

International Journal for Numerical Methods in Engineering · 15.05.2024 · 125 (9)

DOI: 10.1002/nme.7438 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal for Numerical Methods in Engineering, online erschienen am 06.02.2024. Verfasst von Nathan D. Gavin und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The material point method is a versatile technique which can be used to solve various types of solid mechanics problems, especially those involving large deformations. However, the capability of the material point method to track a load‐displacement response can deteriorate once a limit point, such as snap‐through or snap‐back, in the response is encountered. One way of overcoming this is to use path following techniques, such as an arc‐length method. This technique is well established in finite element analysis but not within any material point method formulation. This paper provides for the first time an arc‐length controlled implicit, quasi‐static material point method. The modifications to the standard arc‐length scheme to allow for the stable execution of an arc‐length solver within the material point method are detailed. The capability of the material point‐based arc‐length method is demonstrated through a number of problems, which include linear elastic, non‐linear elastic, linear elastic‐perfectly plastic and linear elastic‐plastic softening material behaviour under large deformations. The techniques presented in this paper are essential for arc‐length techniques to be applied effectively to the material point method and the combination of these techniques makes the method suitable for new problems that cannot be solved with existing implicit material point approaches.

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Gavin, N. D., Pretti, G., Coombs, W. M., Brigham, J. C., & Augarde, C. E. (2024). On the implementation of a material point‐based arc‐length method. International Journal for Numerical Methods in Engineering, 125(9). https://doi.org/10.1002/nme.7438

Vancouver

Gavin ND, Pretti G, Coombs WM, Brigham JC, Augarde CE. On the implementation of a material point‐based arc‐length method. International Journal for Numerical Methods in Engineering. 2024;125(9). doi:10.1002/nme.7438

BibTeX
@article{Gavin2024,
  author = {Gavin, Nathan D. and Pretti, Giuliano and Coombs, William M. and Brigham, John C. and Augarde, Charles E.},
  title = {On the implementation of a material point‐based arc‐length method},
  journal = {International Journal for Numerical Methods in Engineering},
  year = {2024},
  volume = {125},
  number = {9},
  doi = {10.1002/nme.7438}
}
Kostenlos starten →