EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Post‐Fabrication Phase Correction of SOI 4 × 4 MMI‐Based 90° Optical Hybrids via Femtosecond‐Laser Trimming

Jia Du iD, Xiongping Bao iD, Jintian Lin iD, Xiao Chen, Wenbing Jiang iD, Boyu Zhang iD, Yiti Xiong iD, Wenjun Li, Libing Zhou iD

Nanophotonics · 27.10.2026 · 15 (20)

DOI: 10.1002/nap2.70320 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Nanophotonics, online erschienen am 18.10.2026. Verfasst von Jia Du und 8 weiteren Autor:innen. Beteiligte Einrichtung: Wangzhijiang Innovation Center for Laser, Aerospace Laser Technology and System Department Shanghai Institute of Optics and Fine Mechanics Chinese Ac…. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Integrated 90° optical hybrids are essential passive components in coherent receivers, yet their quadrature accuracy and power balance are highly susceptible to fabrication‐induced deviations. Here, we demonstrate postfabrication phase trimming of silicon‐on‐insulator 4 × 4 multimode‐interference‐based 90° optical hybrids using localized femtosecond‐laser modification. The hybrid is implemented with a shallow‐etched rib multimode section and characterized by mapping the relative output phase onto wavelength‐dependent interference spectra. As‐fabricated devices show phase deviations exceeding the ± 5° target and exhibit device‐to‐device performance fluctuations among nominally identical structures. Raman spectroscopy and high‐resolution transmission electron microscopy confirm that femtosecond‐laser irradiation induces a localized crystalline‐to‐amorphous transformation in silicon, introducing a permanent refractive‐index perturbation. By selectively modifying the MMI region, the modal phase evolution and output phase balance can be adjusted after fabrication. After trimming, the phase deviations are reduced to within ± 5° across the full C‐band, accompanied by recovery of the quadrature response, while maintaining common‐mode rejection ratio above 20 dB. These results demonstrate a permanent and power‐free calibration route for coherent silicon photonic circuits.

Schlagwörter

Stichwörter der Autor:innen

90°optical hybridfemtosecond‐laser trimmingmultimode interferencepost‐fabrication correctionsilicon photonics

Autor:innen und Institutionen

  • Wangzhijiang Innovation Center for Laser, Aerospace Laser Technology and System Department Shanghai Institute of Optics and Fine Mechanics Chinese Academy of Sciences Shanghai China.
  • Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of Sciences Beijing China.
  • State Key Laboratory of Ultra-intense Laser Science and Technology Shanghai Institute of Optics and Fine Mechanics Chinese Academy of Sciences Shanghai China.

ORCID-Profile: Jia Du, Xiongping Bao, Jintian Lin, Wenbing Jiang, Boyu Zhang, Yiti Xiong, Libing Zhou

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Du, J., Bao, X., Lin, J., Chen, X., Jiang, W., Zhang, B., Xiong, Y., Li, W., & Zhou, L. (2026). Post‐Fabrication Phase Correction of SOI 4 × 4 MMI‐Based 90° Optical Hybrids via Femtosecond‐Laser Trimming. Nanophotonics, 15(20). https://doi.org/10.1002/nap2.70320

Vancouver

Du J, Bao X, Lin J, Chen X, Jiang W, Zhang B, et al. Post‐Fabrication Phase Correction of SOI 4 × 4 MMI‐Based 90° Optical Hybrids via Femtosecond‐Laser Trimming. Nanophotonics. 2026;15(20). doi:10.1002/nap2.70320

BibTeX
@article{Du2026,
  author = {Du, Jia and Bao, Xiongping and Lin, Jintian and Chen, Xiao and Jiang, Wenbing and Zhang, Boyu and Xiong, Yiti and Li, Wenjun and Zhou, Libing},
  title = {Post‐Fabrication Phase Correction of SOI 4 × 4 MMI‐Based 90° Optical Hybrids via Femtosecond‐Laser Trimming},
  journal = {Nanophotonics},
  year = {2026},
  volume = {15},
  number = {20},
  doi = {10.1002/nap2.70320}
}
Kostenlos starten →