EUVIMEDEUVIMED entdecken
Crossref

State‐Equivalent Compaction of Dam Rockfill: Experimental Method, Constitutive Formulation and Numerical Case Study

Jiajun Pan, Yicheng Chen, Zhanlin Cheng, Wei Zhao, Xudong Zhao, Yiwei Lu, Yanli Wang, Han Xu, Yongzhen Zuo, Qi Zhang

International Journal for Numerical and Analytical Methods in Geomechanics · 2026-07 · 50 (10) · 4268-4283

DOI: 10.1002/nag.70315 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal for Numerical and Analytical Methods in Geomechanics, online erschienen am 27.04.2026. Verfasst von Jiajun Pan und 9 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study demonstrates that the pressuremeter modulus can serve as a practical state descriptor for rockfill and can be used directly in constitutive analysis. Large‐scale pressuremeter model tests on two gradations established a clear, monotonic relation between pressuremeter modulus and dry density. Using this relation, densities corresponding to target moduli of 75 and 90 MPa were selected for drained triaxial tests. The results reveal an equal‐modulus equivalence for the two scaled gradations tested: once specimens are compacted to the dry densities corresponding to the same pressuremeter modulus, their stress–strain and volumetric responses become practically indistinguishable across these gradations. These conclusions are drawn from tests on only two scaled materials derived from the same prototype rockfill, so the observed equivalence should not yet be regarded as universal. Building on this finding, we integrate the pressuremeter modulus into a standard hypoplastic formulation through a minimal two‐part enhancement: a state normalisation of the density measure and a stiffness‐scale alignment, achieved by scaling the granular hardness parameter in proportion to the measured modulus. The tensorial structure and calibrated constants of the reference model remain unchanged; only zone‐wise state inputs derived from field or laboratory modulus are required. With one parameter set calibrated at 75 MPa, the framework reproduces element tests at both target moduli and is implemented in a three‐dimensional embankment model of the 298 m Lianghekou rockfill dam. Predicted settlement profiles during staged construction closely match monitoring, capturing both the magnitude and the curvature of the settlement troughs and the observed flattening in zones that achieved higher modulus. A baseline analysis without modulus‐based normalisation shows systematic bias, underscoring the value of the proposed integration.

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Pan, J., Chen, Y., Cheng, Z., Zhao, W., Zhao, X., Lu, Y., Wang, Y., Xu, H., Zuo, Y., & Zhang, Q. (2026). State‐Equivalent Compaction of Dam Rockfill: Experimental Method, Constitutive Formulation and Numerical Case Study. International Journal for Numerical and Analytical Methods in Geomechanics, 50(10), 4268-4283. https://doi.org/10.1002/nag.70315

Vancouver

Pan J, Chen Y, Cheng Z, Zhao W, Zhao X, Lu Y, et al. State‐Equivalent Compaction of Dam Rockfill: Experimental Method, Constitutive Formulation and Numerical Case Study. International Journal for Numerical and Analytical Methods in Geomechanics. 2026;50(10):4268-4283. doi:10.1002/nag.70315

BibTeX
@article{Pan2026,
  author = {Pan, Jiajun and Chen, Yicheng and Cheng, Zhanlin and Zhao, Wei and Zhao, Xudong and Lu, Yiwei and Wang, Yanli and Xu, Han and Zuo, Yongzhen and Zhang, Qi},
  title = {State‐Equivalent Compaction of Dam Rockfill: Experimental Method, Constitutive Formulation and Numerical Case Study},
  journal = {International Journal for Numerical and Analytical Methods in Geomechanics},
  year = {2026},
  volume = {50},
  number = {10},
  pages = {4268--4283},
  doi = {10.1002/nag.70315}
}
Kostenlos starten →