EUVIMEDEUVIMED entdecken
Crossref

Hydraulic Fracturing Roof Cutting and Pressure Relief for Controlling Mining‐Induced Cross‐Cut Deformation

Wu Xuewu, Zhenqian Ma, Yuankun Zhu, Yunlin Shuai, Yuxiang Bao, Hui Wang

International Journal for Numerical and Analytical Methods in Geomechanics · 2026-06 · 50 (8) · 3754-3768

DOI: 10.1002/nag.70301 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal for Numerical and Analytical Methods in Geomechanics, online erschienen am 25.03.2026. Verfasst von Wu Xuewu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Under complex deep mining conditions, crosscuts adjacent to goafs often face severe surrounding rock stability issues due to the hanging of hard roofs and mining disturbances. Taking the large deformation of the 261 cross‐cut at Huoshaopu Coal Mine as an example, hydraulic fracturing for roof cutting and pressure relief was applied for control. Through integrated field observation, theoretical modeling, numerical simulation, and engineering practice, it was found that the depth of roof fractures reached 6.23 m, with an integrity coefficient as low as 0.4–0.5. A cantilever beam model was established and stress formulas were derived, while UDEC simulations verified the effectiveness of hydraulic fracturing in cutting off the roof and redistributing stress. On‐site implementation of bolt‐grouting reinforcement combined with the “retreat‐style single‐borehole multi‐stage fracturing” technique successfully severed the main roof cantilever, leading to a significant reduction in abutment pressure: coal pillar stress decreased from 39.35 to 32.35 MPa (a reduction of 17.8%), and solid coal side stress decreased from 31.05 to 27.02 MPa (a reduction of 13.0%). Roadway convergence rates were reduced by 28%–38% without any collapse. The study demonstrates that hydraulic fracturing is an effective method for mitigating stress and deformation in crosscuts, providing a critical engineering strategy for controlling thick and hard roof strata.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Xuewu, W., Ma, Z., Zhu, Y., Shuai, Y., Bao, Y., & Wang, H. (2026). Hydraulic Fracturing Roof Cutting and Pressure Relief for Controlling Mining‐Induced Cross‐Cut Deformation. International Journal for Numerical and Analytical Methods in Geomechanics, 50(8), 3754-3768. https://doi.org/10.1002/nag.70301

Vancouver

Xuewu W, Ma Z, Zhu Y, Shuai Y, Bao Y, Wang H. Hydraulic Fracturing Roof Cutting and Pressure Relief for Controlling Mining‐Induced Cross‐Cut Deformation. International Journal for Numerical and Analytical Methods in Geomechanics. 2026;50(8):3754-3768. doi:10.1002/nag.70301

BibTeX
@article{Xuewu2026,
  author = {Xuewu, Wu and Ma, Zhenqian and Zhu, Yuankun and Shuai, Yunlin and Bao, Yuxiang and Wang, Hui},
  title = {Hydraulic Fracturing Roof Cutting and Pressure Relief for Controlling Mining‐Induced Cross‐Cut Deformation},
  journal = {International Journal for Numerical and Analytical Methods in Geomechanics},
  year = {2026},
  volume = {50},
  number = {8},
  pages = {3754--3768},
  doi = {10.1002/nag.70301}
}
Kostenlos starten →