Effect of Mineral Heterogeneity on the Triaxial Compressive Behavior of Granular Rock: A PFC3D‐GBM Numerical Study
International Journal for Numerical and Analytical Methods in Geomechanics · 2025-12 · 49 (18) · 4336-4368
DOI: 10.1002/nag.70077 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal for Numerical and Analytical Methods in Geomechanics, online erschienen am 16.09.2025. Verfasst von Zi‐ming Song und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 56 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province.
Abstract (Originalsprache)
The mechanical properties of granular rocks are intrinsically linked to the heterogeneity of mineral grains. In this study, a 3D grain‐based model (PFC3D‐GBM) incorporating a hybrid contact model was established. Triaxial compression numerical simulations were conducted to investigate how confining pressure and mineral heterogeneity—characterized by spatial distribution, volume fraction, geometric size, and boundary strength of mineral grains—affect the fracture behavior and mechanical properties of coarse‐grained limestone. The results show that force chains serve as load‐bearing paths that distribute the external load. The orientation of these chains remains uniform, irrespective of the load magnitude. The ratio of high‐strength force chains to weak‐strength force chains ( R HF/WF ) and the ratio of high‐strength force chains to microcracks ( R HF/c ) serve as quantitative indicators of bearing capacity and fracture resistance. At lower confining pressure ( σ 3 ≤ 10 MPa), the specimens exhibit reduced peak strength and increased brittleness, with failure typically occurring along a single macroscopic fracture plane. As σ 3 increases, the formation of “X”‐shaped failure becomes more pronounced. At the grain scale, a higher dolomite volume facilitates the formation of additional high‐strength force chains within the specimen, along with an increase in Tran‐D‐cs at peak stress. As Tran‐D‐cs require a higher concentration of stress, σ p increases by 13%. Moreover, stronger grain boundary strength enhances the stress concentration needed for fracture by modifying the proportion of Trans‐c, leading to a 70 MPa increase in σ p . Larger grain sizes, in turn, accommodate more force chains, necessitating a higher σ p for fracture.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Natural Science Foundation of Jiangsu Province
Zitieren
APA
Song, Z., Meng, Q., Pu, H., Wu, J., & Liu, J. (2025). Effect of Mineral Heterogeneity on the Triaxial Compressive Behavior of Granular Rock: A PFC3D‐GBM Numerical Study. International Journal for Numerical and Analytical Methods in Geomechanics, 49(18), 4336-4368. https://doi.org/10.1002/nag.70077
Vancouver
Song Z, Meng Q, Pu H, Wu J, Liu J. Effect of Mineral Heterogeneity on the Triaxial Compressive Behavior of Granular Rock: A PFC3D‐GBM Numerical Study. International Journal for Numerical and Analytical Methods in Geomechanics. 2025;49(18):4336-4368. doi:10.1002/nag.70077
BibTeX
@article{Song2025,
author = {Song, Zi‐ming and Meng, Qing‐bin and Pu, Hai and Wu, Jiang‐yu and Liu, Jiang‐feng},
title = {Effect of Mineral Heterogeneity on the Triaxial Compressive Behavior of Granular Rock: A PFC3D‐GBM Numerical Study},
journal = {International Journal for Numerical and Analytical Methods in Geomechanics},
year = {2025},
volume = {49},
number = {18},
pages = {4336--4368},
doi = {10.1002/nag.70077}
}
EUVIMED