A Thermo–Hydro–Mechanical Coupled Shear Damage Constitutive Model for Rock‐Concrete Interfaces
International Journal for Numerical and Analytical Methods in Geomechanics · 2025-11 · 49 (16) · 3590-3611
DOI: 10.1002/nag.70035 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal for Numerical and Analytical Methods in Geomechanics, online erschienen am 11.08.2025. Verfasst von Yanni Zheng und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 75 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
The shear mechanical behavior of rock‐concrete interfaces (RCIs) critically governs the stability of support structures in tunnel and underground engineering. However, these interfaces represent the weakest link in composite systems, especially under high geothermal conditions. In such environments, post‐construction concrete is subjected to high‐temperature curing in direct contact with hot surrounding rock, leading to thermal damage. During tunnel operation, geothermal water infiltration induces further interface degradation through thermo‐hydro‐mechanical (T–H–M) coupling. To address these challenges, this study develops a novel shear damage constitutive model for RCIs under T–H–M coupling by integrating statistical damage theory with the JRC‐JCS joint strength criterion. A systematic parameter calibration methodology is established to ensure model accuracy and reliability. Comprehensive shear tests on concrete‐granite interfaces demonstrate the model's strong capability to replicate the full‐range shear stress–strain behavior under T–H–M coupling. Furthermore, the model was further modified to overcome two critical limitations of compressive‐type statistical damage approaches: (1) inadequate representation of nonlinear concave curvature during pre‐peak yielding, and (2) poor characterization of residual strength evolution post‐peak. Based on the developed shear damage constitutive model, the evolution of interface damage during high‐temperature curing in the construction stage and the subsequent T–H–M‐induced degradation operation are systematically analyzed. These findings provide theoretical foundations for optimizing tunnel support design in geothermal environments, particularly by identifying early microcrack initiation thresholds and guiding damage‐informed reinforcement strategies. Summary Shear tests identify four‐phase T–H–M behavior: compaction, elasticity, hardening, and softening. Novel T–H–M‐coupled shear damage model integrating JRC‐JCS criterion with statistical damage theory. Modified statistical formulation resolves pre‐peak nonlinearity and post‐softening limitations. Experimental validation shows
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zheng, Y., Zhang, S., Jia, C., Shi, C., & Lei, M. (2025). A Thermo–Hydro–Mechanical Coupled Shear Damage Constitutive Model for Rock‐Concrete Interfaces. International Journal for Numerical and Analytical Methods in Geomechanics, 49(16), 3590-3611. https://doi.org/10.1002/nag.70035
Vancouver
Zheng Y, Zhang S, Jia C, Shi C, Lei M. A Thermo–Hydro–Mechanical Coupled Shear Damage Constitutive Model for Rock‐Concrete Interfaces. International Journal for Numerical and Analytical Methods in Geomechanics. 2025;49(16):3590-3611. doi:10.1002/nag.70035
BibTeX
@article{Zheng2025,
author = {Zheng, Yanni and Zhang, Sheng and Jia, Chaojun and Shi, Chenghua and Lei, Mingfeng},
title = {A Thermo–Hydro–Mechanical Coupled Shear Damage Constitutive Model for Rock‐Concrete Interfaces},
journal = {International Journal for Numerical and Analytical Methods in Geomechanics},
year = {2025},
volume = {49},
number = {16},
pages = {3590--3611},
doi = {10.1002/nag.70035}
}
EUVIMED