EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dynamic transfer model and applications of a penetrating projectile‐fuze multibody system

Da Yu, Benqiang Yang, Kai Yan, Changsheng Li, Xiang Ma, Xiangyu Han, He Zhang, Keren Dai

International Journal of Mechanical System Dynamics · 2023-12 · 3 (4) · 360-372

DOI: 10.1002/msd2.12092 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Mechanical System Dynamics, online erschienen am 21.12.2023. Verfasst von Da Yu und 7 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In modern warfare, fortifications are being placed deeper underground and with increased mechanical strength, placing higher demands on the target speed of the penetrating munitions that attack them. In such practical scenarios, penetrating fuze inevitably experience extreme mechanical loads with long pulse durations and high shock strengths. Experimental results indicate that their shock accelerations can even exceed those of the projectile by several times. However, due to the unclear understanding of the dynamic transfer mechanism of the penetrating fuze system under such extreme mechanical conditions, there is still a lack of effective methods to accurately estimate and design protection against the impact loads on the penetrating fuze. This paper focuses on the dynamic response of penetrating munitions and fuzes under high impact, establishing a nonlinear dynamic transfer model for penetrating fuze systems, which can calculate the sensor overload signal of the fuze location. The results show that the relative error between the peak acceleration obtained by the proposed multibody dynamic transfer model and that obtained by experimental tests is only 15.7%, which is much lower than the 26.4% error between finite element simulations and experimental tests. The computational burden of the proposed method mainly lies in the parameter calibration process, which needs to be performed only once for a specific projectile‐fuze system. Once calibrated, the model can rapidly conduct parameter scanning simulations for the projectile mass, target plate strength, and impact velocity with an extremely low computational cost to obtain the response characteristics of the projectile‐fuze system under various operating conditions. This greatly facilitates the practical engineering design of penetrating ammunition fuze.

Zitieren

APA

Yu, D., Yang, B., Yan, K., Li, C., Ma, X., Han, X., Zhang, H., & Dai, K. (2023). Dynamic transfer model and applications of a penetrating projectile‐fuze multibody system. International Journal of Mechanical System Dynamics, 3(4), 360-372. https://doi.org/10.1002/msd2.12092

Vancouver

Yu D, Yang B, Yan K, Li C, Ma X, Han X, et al. Dynamic transfer model and applications of a penetrating projectile‐fuze multibody system. International Journal of Mechanical System Dynamics. 2023;3(4):360-372. doi:10.1002/msd2.12092

BibTeX
@article{Yu2023,
  author = {Yu, Da and Yang, Benqiang and Yan, Kai and Li, Changsheng and Ma, Xiang and Han, Xiangyu and Zhang, He and Dai, Keren},
  title = {Dynamic transfer model and applications of a penetrating projectile‐fuze multibody system},
  journal = {International Journal of Mechanical System Dynamics},
  year = {2023},
  volume = {3},
  number = {4},
  pages = {360--372},
  doi = {10.1002/msd2.12092}
}
Kostenlos starten →